# uncomment if you get no picture on HDMI for a default "safe" mode #hdmi_safe=1 disable_overscan=0 # uncomment to force a specific HDMI mode (this will force VGA) #hdmi_group=1 #hdmi_mode=1 # comment to get jack audio #hdmi_drive=2 #config_hdmi_boost=0 # force hdmi while the tv can take time before sending the signal on the hdmi output #hdmi_force_hotplug=1 # uncomment for composite PAL sdtv_mode=2 sdtv_aspect=1 # uncomment for lirc-rpi #dtoverlay=lirc-rpi # if you plug your tv at the same time as your rpi and that the rpi switches from the hdmi or give a low resolution because tv had no enough time to initialize it boot_delay=3 # uncomment if you don't want the rainbow at startup disable_splash=1 # Overclock gpu_mem_256=128 gpu_mem_512=256 gpu_mem_1024=512 avoid_safe_mode=1 kernel=zImage # NOOBS Auto-generated Settings: #hdmi_force_hotplug=1 arm_freq=950 core_freq=250 sdram_freq=450 force_turbo=0 over_voltage=6 over_voltage_sdram=0 gpu_freq=250 overscan_scale=1 dtoverlay=pwm-2chan,pin=18,func=2,pin2=13,func2=4