uC LED & Buffer Testing ======================= Program board with LED_TEST3.hex Enable VDD at 3V3 and enable MCLR Board should display the following sequence in an endless loop * RED for a second * Green for a second * Red for a second * Off for a second IR RX & Hall Effect Testing =========================== Program board with IR_HE_Test3.hex Enable VDD at 3V3 and enable MCLR Board should display the following sequence in an endless loop * RED * Green if IR signal being received * BLUE if hall effect sensor triggered Point an active RC5 transmitter at the board and it should flash green. Place a small magnet near the hall effect sensor and the display should turn blue.