Author: Muhammad Adeel Ijaz
Email: revolutionbug@outlook.com
Twitter: twitter.com/revolutionbug
LinkedIn: linkedin.com/in/revolutionbug

==========================================================
Texas Instruments EK-TM4C123GXL Traffic Light Controller:-
==========================================================
This is a breadboard based project by which we make a traffic light controller system with microcontroller.
The duration of RED and BLUE LED is set to 15 Seconds. The duration of Yellow LED is set to 1 Second.

===============
Requirements:-
===============
1- Texas Instruments EK-TM4C123GXL
2- Red LED  x4
3- Yellow LED x4
4- Blue or Green LED  x4
5- LM Flash Programmer	(software on PC)

===========
Pin-outs:-
===========
==========================================================
TM4C123GXL    ||        LED's
==========================================================
PB5			L1 (Red) , L2 (Red)
PB0			L1 (Yellow) , L2 (Yellow)
PB1			L1 (Blue) , L2 (Blue)
PE4			L3 (Red) , L4 (Red)
PE5			L3 (Yellow) , L4 (Yellow)
PB4			L3 (Blue) , L4 (Blue)
GND			All negative terminals of LED's
==========================================================

======
Note:
======
	For LED allocation, also concern "plot" figure attached with the project.