<b>IC Packages an Sockets</b><p>
<author>Created by librarian@cadsoft.de</author>
<b>Dual In Line Package</b> 0.6 inch
>NAME
>VALUE
<b>Dual In Line Package Small</b>
>NAME
>VALUE
<b>Dual In Line Package</b>
>NAME
>VALUE
<b>Dual In Line Package</b>
>NAME
>VALUE
<b>Dual In Line Socket</b>
>VALUE
>NAME
>NAME
>VALUE
>NAME
>VALUE
<b>Dual In Line</b>
<b>Dual In Line / Socket</b>
Spark Fun Electronics' preferred foot prints. <b>Not to be used for commercial purposes.</b> We've spent an enormous amount of time creating and checking these footprints and parts. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
>NAME
>VALUE
>VALUE
>NAME
>VALUE
>NAME
>VALUE
<b>Supply Symbols</b><p>
GND, VCC, 0V, +5V, -5V, etc.<p>
Please keep in mind, that these devices are necessary for the
automatic wiring of the supply signals.<p>
The pin name defined in the symbol is identical to the net which is to be wired automatically.<p>
In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p>
<author>Created by librarian@cadsoft.de</author>
>VALUE
<b>SUPPLY SYMBOL</b>
<b>Resistors, Capacitors, Inductors</b><p>
Based on the previous libraries:
<ul>
<li>r.lbr
<li>cap.lbr
<li>cap-fe.lbr
<li>captant.lbr
<li>polcap.lbr
<li>ipc-smd.lbr
</ul>
All SMD packages are defined according to the IPC specifications and CECC<p>
<author>Created by librarian@cadsoft.de</author><p>
<p>
for Electrolyt Capacitors see also :<p>
www.bccomponents.com <p>
www.panasonic.com<p>
www.kemet.com<p>
http://www.secc.co.jp/pdf/os_e/2004/e_os_all.pdf <b>(SANYO)</b>
<p>
for trimmer refence see : <u>www.electrospec-inc.com/cross_references/trimpotcrossref.asp</u><p>
<table border=0 cellspacing=0 cellpadding=0 width="100%" cellpaddding=0>
<tr valign="top">
<! <td width="10"> </td>
<td width="90%">
<b><font color="#0000FF" size="4">TRIM-POT CROSS REFERENCE</font></b>
<P>
<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=2>
<TR>
<TD COLSPAN=8>
<FONT SIZE=3 FACE=ARIAL><B>RECTANGULAR MULTI-TURN</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">BOURNS</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">BI TECH</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">DALE-VISHAY</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">PHILIPS/MEPCO</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">MURATA</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">PANASONIC</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">SPECTROL</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">MILSPEC</FONT>
</B>
</TD><TD> </TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3 >
3005P<BR>
3006P<BR>
3006W<BR>
3006Y<BR>
3009P<BR>
3009W<BR>
3009Y<BR>
3057J<BR>
3057L<BR>
3057P<BR>
3057Y<BR>
3059J<BR>
3059L<BR>
3059P<BR>
3059Y<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
89P<BR>
89W<BR>
89X<BR>
89PH<BR>
76P<BR>
89XH<BR>
78SLT<BR>
78L ALT<BR>
56P ALT<BR>
78P ALT<BR>
T8S<BR>
78L<BR>
56P<BR>
78P<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
T18/784<BR>
783<BR>
781<BR>
-<BR>
-<BR>
-<BR>
2199<BR>
1697/1897<BR>
1680/1880<BR>
2187<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
8035EKP/CT20/RJ-20P<BR>
-<BR>
RJ-20X<BR>
-<BR>
-<BR>
-<BR>
1211L<BR>
8012EKQ ALT<BR>
8012EKR ALT<BR>
1211P<BR>
8012EKJ<BR>
8012EKL<BR>
8012EKQ<BR>
8012EKR<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
2101P<BR>
2101W<BR>
2101Y<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
2102L<BR>
2102S<BR>
2102Y<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
EVMCOG<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
43P<BR>
43W<BR>
43Y<BR>
-<BR>
-<BR>
-<BR>
-<BR>
40L<BR>
40P<BR>
40Y<BR>
70Y-T602<BR>
70L<BR>
70P<BR>
70Y<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
RT/RTR12<BR>
RT/RTR12<BR>
RT/RTR12<BR>
-<BR>
RJ/RJR12<BR>
RJ/RJR12<BR>
RJ/RJR12<BR></FONT>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
<FONT SIZE=4 FACE=ARIAL><B>SQUARE MULTI-TURN</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3250L<BR>
3250P<BR>
3250W<BR>
3250X<BR>
3252P<BR>
3252W<BR>
3252X<BR>
3260P<BR>
3260W<BR>
3260X<BR>
3262P<BR>
3262W<BR>
3262X<BR>
3266P<BR>
3266W<BR>
3266X<BR>
3290H<BR>
3290P<BR>
3290W<BR>
3292P<BR>
3292W<BR>
3292X<BR>
3296P<BR>
3296W<BR>
3296X<BR>
3296Y<BR>
3296Z<BR>
3299P<BR>
3299W<BR>
3299X<BR>
3299Y<BR>
3299Z<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
66P ALT<BR>
66W ALT<BR>
66X ALT<BR>
66P ALT<BR>
66W ALT<BR>
66X ALT<BR>
-<BR>
64W ALT<BR>
-<BR>
64P ALT<BR>
64W ALT<BR>
64X ALT<BR>
64P<BR>
64W<BR>
64X<BR>
66X ALT<BR>
66P ALT<BR>
66W ALT<BR>
66P<BR>
66W<BR>
66X<BR>
67P<BR>
67W<BR>
67X<BR>
67Y<BR>
67Z<BR>
68P<BR>
68W<BR>
68X<BR>
67Y ALT<BR>
67Z ALT<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
5050<BR>
5091<BR>
5080<BR>
5087<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
T63YB<BR>
T63XB<BR>
-<BR>
-<BR>
-<BR>
5887<BR>
5891<BR>
5880<BR>
-<BR>
-<BR>
-<BR>
T93Z<BR>
T93YA<BR>
T93XA<BR>
T93YB<BR>
T93XB<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
8026EKP<BR>
8026EKW<BR>
8026EKM<BR>
8026EKP<BR>
8026EKB<BR>
8026EKM<BR>
1309X<BR>
1309P<BR>
1309W<BR>
8024EKP<BR>
8024EKW<BR>
8024EKN<BR>
RJ-9P/CT9P<BR>
RJ-9W<BR>
RJ-9X<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
3103P<BR>
3103Y<BR>
3103Z<BR>
3103P<BR>
3103Y<BR>
3103Z<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
3105P/3106P<BR>
3105W/3106W<BR>
3105X/3106X<BR>
3105Y/3106Y<BR>
3105Z/3105Z<BR>
3102P<BR>
3102W<BR>
3102X<BR>
3102Y<BR>
3102Z<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
EVMCBG<BR>
EVMCCG<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
55-1-X<BR>
55-4-X<BR>
55-3-X<BR>
55-2-X<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
50-2-X<BR>
50-4-X<BR>
50-3-X<BR>
-<BR>
-<BR>
-<BR>
64P<BR>
64W<BR>
64X<BR>
64Y<BR>
64Z<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
RT/RTR22<BR>
RT/RTR22<BR>
RT/RTR22<BR>
RT/RTR22<BR>
RJ/RJR22<BR>
RJ/RJR22<BR>
RJ/RJR22<BR>
RT/RTR26<BR>
RT/RTR26<BR>
RT/RTR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RT/RTR24<BR>
RT/RTR24<BR>
RT/RTR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
<FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3323P<BR>
3323S<BR>
3323W<BR>
3329H<BR>
3329P<BR>
3329W<BR>
3339H<BR>
3339P<BR>
3339W<BR>
3352E<BR>
3352H<BR>
3352K<BR>
3352P<BR>
3352T<BR>
3352V<BR>
3352W<BR>
3362H<BR>
3362M<BR>
3362P<BR>
3362R<BR>
3362S<BR>
3362U<BR>
3362W<BR>
3362X<BR>
3386B<BR>
3386C<BR>
3386F<BR>
3386H<BR>
3386K<BR>
3386M<BR>
3386P<BR>
3386S<BR>
3386W<BR>
3386X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
25P<BR>
25S<BR>
25RX<BR>
82P<BR>
82M<BR>
82PA<BR>
-<BR>
-<BR>
-<BR>
91E<BR>
91X<BR>
91T<BR>
91B<BR>
91A<BR>
91V<BR>
91W<BR>
25W<BR>
25V<BR>
25P<BR>
-<BR>
25S<BR>
25U<BR>
25RX<BR>
25X<BR>
72XW<BR>
72XL<BR>
72PM<BR>
72RX<BR>
-<BR>
72PX<BR>
72P<BR>
72RXW<BR>
72RXL<BR>
72X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
T7YB<BR>
T7YA<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
TXD<BR>
TYA<BR>
TYP<BR>
-<BR>
TYD<BR>
TX<BR>
-<BR>
150SX<BR>
100SX<BR>
102T<BR>
101S<BR>
190T<BR>
150TX<BR>
101<BR>
-<BR>
-<BR>
101SX<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
ET6P<BR>
ET6S<BR>
ET6X<BR>
RJ-6W/8014EMW<BR>
RJ-6P/8014EMP<BR>
RJ-6X/8014EMX<BR>
TM7W<BR>
TM7P<BR>
TM7X<BR>
-<BR>
8017SMS<BR>
-<BR>
8017SMB<BR>
8017SMA<BR>
-<BR>
-<BR>
CT-6W<BR>
CT-6H<BR>
CT-6P<BR>
CT-6R<BR>
-<BR>
CT-6V<BR>
CT-6X<BR>
-<BR>
-<BR>
8038EKV<BR>
-<BR>
8038EKX<BR>
-<BR>
-<BR>
8038EKP<BR>
8038EKZ<BR>
8038EKW<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
3321H<BR>
3321P<BR>
3321N<BR>
1102H<BR>
1102P<BR>
1102T<BR>
RVA0911V304A<BR>
-<BR>
RVA0911H413A<BR>
RVG0707V100A<BR>
RVA0607V(H)306A<BR>
RVA1214H213A<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
3104B<BR>
3104C<BR>
3104F<BR>
3104H<BR>
-<BR>
3104M<BR>
3104P<BR>
3104S<BR>
3104W<BR>
3104X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
EVMQ0G<BR>
EVMQIG<BR>
EVMQ3G<BR>
EVMS0G<BR>
EVMQ0G<BR>
EVMG0G<BR>
-<BR>
-<BR>
-<BR>
EVMK4GA00B<BR>
EVM30GA00B<BR>
EVMK0GA00B<BR>
EVM38GA00B<BR>
EVMB6<BR>
EVLQ0<BR>
-<BR>
EVMMSG<BR>
EVMMBG<BR>
EVMMAG<BR>
-<BR>
-<BR>
EVMMCS<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
EVMM1<BR>
-<BR>
-<BR>
EVMM0<BR>
-<BR>
-<BR>
EVMM3<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
62-3-1<BR>
62-1-2<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
67R<BR>
-<BR>
67P<BR>
-<BR>
-<BR>
-<BR>
-<BR>
67X<BR>
63V<BR>
63S<BR>
63M<BR>
-<BR>
-<BR>
63H<BR>
63P<BR>
-<BR>
-<BR>
63X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
RJ/RJR50<BR>
RJ/RJR50<BR>
RJ/RJR50<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
</TABLE>
<P> <P>
<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=3>
<TR>
<TD COLSPAN=7>
<FONT color="#0000FF" SIZE=4 FACE=ARIAL><B>SMD TRIM-POT CROSS REFERENCE</B></FONT>
<P>
<FONT SIZE=4 FACE=ARIAL><B>MULTI-TURN</B></FONT>
</TD>
</TR>
<TR>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3224G<BR>
3224J<BR>
3224W<BR>
3269P<BR>
3269W<BR>
3269X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
44G<BR>
44J<BR>
44W<BR>
84P<BR>
84W<BR>
84X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
ST63Z<BR>
ST63Y<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
ST5P<BR>
ST5W<BR>
ST5X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
<TR>
<TD COLSPAN=7>
</TD>
</TR>
<TR>
<TD COLSPAN=7>
<FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT>
</TD>
</TR>
<TR>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3314G<BR>
3314J<BR>
3364A/B<BR>
3364C/D<BR>
3364W/X<BR>
3313G<BR>
3313J<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
23B<BR>
23A<BR>
21X<BR>
21W<BR>
-<BR>
22B<BR>
22A<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
ST5YL/ST53YL<BR>
ST5YJ/5T53YJ<BR>
ST-23A<BR>
ST-22B<BR>
ST-22<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
ST-4B<BR>
ST-4A<BR>
-<BR>
-<BR>
-<BR>
ST-3B<BR>
ST-3A<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
EVM-6YS<BR>
EVM-1E<BR>
EVM-1G<BR>
EVM-1D<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
G4B<BR>
G4A<BR>
TR04-3S1<BR>
TRG04-2S1<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
DVR-43A<BR>
CVR-42C<BR>
CVR-42A/C<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
</TABLE>
<P>
<FONT SIZE=4 FACE=ARIAL><B>ALT = ALTERNATE</B></FONT>
<P>
<P>
</td>
</tr>
</table>
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
>NAME
>VALUE
<b>RESISTOR</b> wave soldering<p>
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b><p>
Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf
>NAME
>VALUE
<b>RESISTOR</b> wave soldering<p>
Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.10 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.25 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.12 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.10 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.25 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.25 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.12 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.25 W
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0204, grid 5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0204, grid 7.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0204, grid 2.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 10 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 12 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 15mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 2.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 7.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0309, grid 10mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0309, grid 12.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0309, grid 2.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0411, grid 12.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0411, grid 15 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0411, grid 3.81 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0414, grid 15 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0414, grid 5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0617, grid 17.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0617, grid 22.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0617, grid 5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0922, grid 22.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0613, grid 5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0613, grid 15 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0817, grid 22.5 mm
>NAME
>VALUE
0817
<b>RESISTOR</b><p>
type 0817, grid 6.35 mm
>NAME
>VALUE
0817
<b>RESISTOR</b><p>
type V234, grid 12.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type V235, grid 17.78 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type V526-0, grid 2.5 mm
>NAME
>VALUE
<b>CECC Size RC2211</b> Reflow Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>CECC Size RC2211</b> Wave Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>CECC Size RC3715</b> Reflow Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>CECC Size RC3715</b> Wave Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>CECC Size RC6123</b> Reflow Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>CECC Size RC6123</b> Wave Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0922, grid 7.5 mm
>NAME
>VALUE
0922
<b>RESISTOR</b><p>
type RDH, grid 15 mm
>NAME
>VALUE
RDH
<b>Mini MELF 0102 Axial</b>
>NAME
>VALUE
<b>RESISTOR</b> chip<p>
Source: http://www.vishay.com/docs/20008/dcrcw.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR52<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR53<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR54<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR55<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR56<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RNC55<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RNC60<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Package 4527</b><p>
Source: http://www.vishay.com/docs/31059/wsrhigh.pdf
>NAME
>VALUE
<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf
>NAME
>VALUE
<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf
>NAME
>VALUE
<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf
>NAME
>VALUE
<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf
>NAME
>VALUE
<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf
>NAME
>VALUE
<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf
>NAME
>VALUE
<b>CRCW1218 Thick Film, Rectangular Chip Resistors</b><p>
Source: http://www.vishay.com .. dcrcw.pdf
>NAME
>VALUE
<b>Chip Monolithic Ceramic Capacitors</b> Medium Voltage High Capacitance for General Use<p>
Source: http://www.murata.com .. GRM43DR72E224KW01.pdf
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b><p>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 mm, outline 2.4 x 4.4 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 mm, outline 2.5 x 5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 mm, outline 3 x 5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 mm, outline 4 x 5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 mm, outline 5 x 5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 mm, outline 6 x 5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 mm + 5 mm, outline 2.4 x 7 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 2.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 3.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 4.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 5.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 5 mm, outline 2.4 x 4.4 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 5 mm, outline 2.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 5 mm, outline 4.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 5 mm, outline 3 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 5 mm, outline 5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 5 mm, outline 5.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 5 mm, outline 7.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
Horizontal, grid 5 mm, outline 7.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 7.5 mm, outline 3.2 x 10.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 7.5 mm, outline 4.2 x 10.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 7.5 mm, outline 5.2 x 10.6 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 10.2 mm, outline 4.3 x 13.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 10.2 mm, outline 5.4 x 13.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 10.2 mm, outline 6.4 x 13.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 10.2 mm + 15.2 mm, outline 6.2 x 18.4 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 15 mm, outline 5.4 x 18.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 15 mm, outline 6.4 x 18.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 15 mm, outline 7.2 x 18.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 15 mm, outline 8.4 x 18.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 15 mm, outline 9.1 x 18.2 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 22.5 mm, outline 6.2 x 26.8 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 22.5 mm, outline 7.4 x 26.8 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 22.5 mm, outline 8.7 x 26.8 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 22.5 mm, outline 10.8 x 26.8 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 22.5 mm, outline 11.3 x 26.8 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 27.5 mm, outline 9.3 x 31.6 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 27.5 mm, outline 11.3 x 31.6 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 27.5 mm, outline 13.4 x 31.6 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 27.5 mm, outline 20.5 x 31.6 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 32.5 mm, outline 13.7 x 37.4 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 32.5 mm, outline 16.2 x 37.4 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 32.5 mm, outline 18.2 x 37.4 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 37.5 mm, outline 19.2 x 41.8 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 37.5 mm, outline 20.3 x 41.8 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 5 mm, outline 3.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 37.5 mm, outline 15.5 x 41.8 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 7.5 mm, outline 6.3 x 10.6 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 27.5 mm, outline 15.4 x 31.6 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 27.5 mm, outline 17.3 x 31.6 mm
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 0204 reflow solder</b><p>
Metric Code Size 1005
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 0603 reflow solder</b><p>
Metric Code Size 1608
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 0805 reflow solder</b><p>
Metric Code Size 2012
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 1206 reflow solder</b><p>
Metric Code Size 3216
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 1210 reflow solder</b><p>
Metric Code Size 3225
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 1812 reflow solder</b><p>
Metric Code Size 4532
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 1825 reflow solder</b><p>
Metric Code Size 4564
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 2220 reflow solder</b><p>Metric Code Size 5650
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 2225 reflow solder</b><p>Metric Code Size 5664
>NAME
>VALUE
<b> </b><p>
Source: http://www.vishay.com/docs/10129/hpc0201a.pdf
>NAME
>VALUE
Source: http://www.avxcorp.com/docs/catalogs/cx5r.pdf
>NAME
>VALUE
<b>CAPACITOR</b><p>
Source: AVX .. aphvc.pdf
>NAME
>VALUE
<b>CAPACITOR</b><p>
Source: AVX .. aphvc.pdf
>NAME
>VALUE
>NAME
>VALUE
>NAME
>VALUE
<B>RESISTOR</B>, European symbol
<B>CAPACITOR</B>, European symbol
<h3>SparkFun Electronics' preferred foot prints</h3>
In this library you'll find non-functional items- supply symbols, logos, notations, frame blocks, etc.<br><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br><br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.
>VALUE
>VALUE
Vin supply symbol
<h3>SparkFun Electronics' preferred foot prints</h3>
In this library you'll find connectors and sockets- basically anything that can be plugged into or onto.<br><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br><br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.
>NAME
>VALUE
>NAME
>VALUE
>NAME
>VALUE
>NAME
>VALUE
This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place.
You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line).
This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace"
to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers.
Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,
if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment
will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins.
>NAME
>VALUE
>NAME
>VALUE
>NAME
>VALUE
>Name
>Value
+
-
S
S
>NAME
>VALUE
>NAME
>VALUE
>NAME
>VALUE
>Name
>Value
+
-
Y
B
>VALUE
>NAME
<b>Header 4</b>
Standard 4-pin 0.1" header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115). Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208
<b>Relays</b><p>
<ul>
<li>Eichhoff
<li>Finder
<li>Fujitsu
<li>HAMLIN
<li>OMRON
<li>Matsushita
<li>NAiS
<li>Siemens
<li>Schrack
</ul>
<author>Created by librarian@cadsoft.de</author>
<b>MINIATURE PC BOARD RELAY</b><p>
Source: www.azettler.com .. AZ8-1ch-12DSE.PDF
>NAME
>VALUE
>VALUE
>PART
>PART
<b>MINIATURE PC BOARD RELAY</b> Form C<p>
Source: www.azettler.com .. AZ8-1ch-12DSE.PDF
<b>PTR Connectors</b><p>
Aug. 2004 / PTR Meßtechnik:<br>
Die Bezeichnung der Serie AK505 wurde geändert.<br>
Es handelt sich hierbei um AK500 in horizontaler Ausführung.<p>
<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=2>
<TR>
<TD ALIGN=LEFT>
<FONT SIZE=4 FACE=ARIAL><B>Alte Bezeichnung</B></FONT>
</TD>
<TD ALIGN=LEFT>
<FONT SIZE=4 FACE=ARIAL><B>Neue Bezeichnung</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=LEFT>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">AK505/2,grau</FONT>
</B>
</TD>
<TD ALIGN=LEFT>
<B>
<FONT SIZE=3 FACE=ARIAL color="#0000FF">AK500/2-5.0-H-GRAU</FONT>
</B>
</TD>
</TR>
<TR>
<TD ALIGN=LEFT>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">AK505/2DS,grau</FONT>
</B>
</TD>
<TD ALIGN=LEFT>
<B>
<FONT SIZE=3 FACE=ARIAL color="#0000FF">AK500/2DS-5.0-H-GRAU</FONT>
</B>
</TD>
</TR>
<TR>
<TD ALIGN=LEFT>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">AKZ505/2,grau</FONT>
</B>
</TD>
<TD ALIGN=LEFT>
<B>
<FONT SIZE=3 FACE=ARIAL color="#0000FF">AKZ500/2-5.08-H-GRAU</FONT>
</B>
</TD>
</TABLE>
<author>Created by librarian@cadsoft.de</author>
<b>CONNECTOR</b>
>NAME
>VALUE
1
2
3
<b>CONNECTOR</b>
>NAME
>VALUE
1
2
>NAME
>NAME
>VALUE
<b>CONNECTOR</b>
<b>CONNECTOR</b>
MCP23017
ULN2803
10K
10K
10K
A0
A1
A2
5V
2 x I2C Ports
0V
0V
5V
5V
SDA
SDA
SCL
SCL
V-Relay
0V
0.1uf
0.1uf
0V
0V
+V-Relay
+V-Relay
NOTE 1
V_Relay can be between 5V and
24V as required.
See Note 2 for
addreesing
Default address is 0x20
JP1 .. JP3 can be used to
address up to 8 cards on
the I2C bus
2 x Relay Sypply Ports
NOTE 2
NOTE 3
See Note 1
See Note 3
for R4 & R5
Without these pull-up resistors on the
I2C bus, the I2C bus will not function
correct. It is best to include these two
pull-up resistors on the main board,
and not on the relay boards.
Resistors R4 & R5 are shown for
information purposes only. Do not
forget to include them on the main
project board.
10K
10K
Since Version 6.2.2 text objects can contain more than one line,
which will not be processed correctly with this version.