led = fox.Pin('J7.3','low')
button = fox.Pin('J7.5','in')


                'J7.3'  :  82,
                'J7.5'  :  80,




echo 82 > /sys/class/gpio/export
echo out > /sys/class/gpio/gpio82/direction
echo 0 > /sys/class/gpio/gpio82/value  # LED OFF
echo 1 > /sys/class/gpio/gpio82/value # LED ON



echo 80 > /sys/class/gpio/export
echo in > /sys/class/gpio/gpio80/direction
cat  /sys/class/gpio/gpio80/value  # PIR 1 when alarm



while true
do
a=$(cat /sys/class/gpio/gpio80/value)  # 1=alarm

echo "alarm inp val: "$a

if [ $a = 1 ]; then
printf "alarm"
echo 1 > /sys/class/gpio/gpio82/value # LED ON
/var/www/webcam/webcamalarm.sh
sleep 30 
else
printf "quiet"
echo 0 > /sys/class/gpio/gpio82/value  # LED OFF

fi
sleep 1
done
==================================================