###################################################################### # thinkfan 0.7 example config file # ================================ # # ATTENTION: There is only very basic sanity checking on the configuration. # That means you can set your temperature limits as insane as you like. You # can do anything stupid, e.g. turn off your fan when your CPU reaches 70°C. # # That's why this program is called THINKfan: You gotta think for yourself. # ###################################################################### # # IBM/Lenovo Thinkpads (thinkpad_acpi, /proc/acpi/ibm) # ==================================================== # # IMPORTANT: # # To keep your HD from overheating, you have to specify a correction value for # the sensor that has the HD's temperature. You need to do this because # thinkfan uses only the highest temperature it can find in the system, and # that'll most likely never be your HD, as most HDs are already out of spec # when they reach 55 °C. # Correction values are applied from left to right in the same order as the # temperatures are read from the file. # # For example: # sensor /proc/acpi/ibm/thermal (0, 0, 10) # will add a fixed value of 10 °C the 3rd value read from that file. Check out # http://www.thinkwiki.org/wiki/Thermal_Sensors to find out how much you may # want to add to certain temperatures. # Syntax: # (LEVEL, LOW, HIGH) # LEVEL is the fan level to use (0-7 with thinkpad_acpi) # LOW is the temperature at which to step down to the previous level # HIGH is the temperature at which to step up to the next level # All numbers are integers. # # I use this on my T61p: #sensor /proc/acpi/ibm/thermal (0, 10, 15, 2, 10, 5, 0, 3, 0, 3) #sensor /proc/acpi/ibm/thermal (0, 0, 0, 0, 0, 0, 0, 0, 10, 0, 0, 0, 0, 0, 0, 0) sensor /sys/devices/virtual/thermal/thermal_zone1/temp sensor /sys/devices/platform/thinkpad_hwmon/temp1_input sensor /sys/devices/platform/thinkpad_hwmon/temp2_input sensor /sys/devices/platform/thinkpad_hwmon/temp3_input sensor /sys/devices/platform/thinkpad_hwmon/temp4_input sensor /sys/devices/platform/thinkpad_hwmon/temp9_input (10) (0, 0, 55) (1, 48, 57) (2, 50, 59) (3, 52, 60) (4, 54, 61) (5, 56, 62) ("level full-speed", 57, 32767)