/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ /** * Italian * * LCD Menu Messages * See also http://marlinfw.org/docs/development/lcd_language.html * */ #ifndef LANGUAGE_IT_H #define LANGUAGE_IT_H #define MAPPER_C2C3 #define DISPLAY_CHARSET_ISO10646_1 #define WELCOME_MSG MACHINE_NAME _UxGT(" pronto.") #define MSG_BACK _UxGT("Indietro") #define MSG_SD_INSERTED _UxGT("SD Card inserita") #define MSG_SD_REMOVED _UxGT("SD Card rimossa") #define MSG_LCD_ENDSTOPS _UxGT("Endstop") #define MSG_MAIN _UxGT("Menu principale") #define MSG_AUTOSTART _UxGT("Autostart") #define MSG_DISABLE_STEPPERS _UxGT("Disabilita Motori") #define MSG_DEBUG_MENU _UxGT("Menu di debug") #define MSG_PROGRESS_BAR_TEST _UxGT("Test barra avanzamento") #define MSG_AUTO_HOME _UxGT("Auto Home") #define MSG_AUTO_HOME_X _UxGT("Home asse X") #define MSG_AUTO_HOME_Y _UxGT("Home asse Y") #define MSG_AUTO_HOME_Z _UxGT("Home asse Z") #define MSG_LEVEL_BED_HOMING _UxGT("Home assi XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Premi per iniziare") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Punto successivo") #define MSG_LEVEL_BED_DONE _UxGT("Livel. terminato!") #define MSG_Z_FADE_HEIGHT _UxGT("Fade Height") #define MSG_SET_HOME_OFFSETS _UxGT("Imp. offset home") #define MSG_HOME_OFFSETS_APPLIED _UxGT("Offset applicato") #define MSG_SET_ORIGIN _UxGT("Imposta Origine") #define MSG_PREHEAT_1 _UxGT("Preriscalda PLA") #define MSG_PREHEAT_1_N _UxGT("Prerisc.PLA ") #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1_N _UxGT("Tutto") #define MSG_PREHEAT_1_END MSG_PREHEAT_1_N _UxGT("Ugello") #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1_N _UxGT("Piatto") #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1_N _UxGT("conf") #define MSG_PREHEAT_2 _UxGT("Preriscalda ABS") #define MSG_PREHEAT_2_N _UxGT("Prerisc.ABS ") #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2_N _UxGT("Tutto") #define MSG_PREHEAT_2_END MSG_PREHEAT_2_N _UxGT("Ugello") #define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2_N _UxGT("Piatto") #define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2_N _UxGT("conf") #define MSG_COOLDOWN _UxGT("Raffredda") #define MSG_SWITCH_PS_ON _UxGT("Accendi aliment.") #define MSG_SWITCH_PS_OFF _UxGT("Spegni aliment.") #define MSG_EXTRUDE _UxGT("Estrudi") #define MSG_RETRACT _UxGT("Ritrai") #define MSG_MOVE_AXIS _UxGT("Muovi Asse") #define MSG_BED_LEVELING _UxGT("Livella piano") #define MSG_LEVEL_BED _UxGT("Livella piano") #define MSG_EDITING_STOPPED _UxGT("Modifica Mesh Fermata") #define MSG_USER_MENU _UxGT("Comandi Utente") #define MSG_UBL_DOING_G29 _UxGT("G29 in corso") #define MSG_UBL_UNHOMED _UxGT("Home XYZ prima") #define MSG_UBL_TOOLS _UxGT("Strumenti UBL") #define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling") #define MSG_UBL_MANUAL_MESH _UxGT("Mesh Manuale") #define MSG_UBL_BC_INSERT _UxGT("Metti spessore & misura") #define MSG_UBL_BC_INSERT2 _UxGT("Misura") #define MSG_UBL_BC_REMOVE _UxGT("Rimuovi & misura piatto") #define MSG_UBL_MOVING_TO_NEXT _UxGT("Spostamento sucessivo") #define MSG_UBL_ACTIVATE_MESH _UxGT("Attiva UBL") #define MSG_UBL_DEACTIVATE_MESH _UxGT("Disattiva UBL") #define MSG_UBL_SET_BED_TEMP _UxGT("Temp Piatto") #define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP #define MSG_UBL_SET_HOTEND_TEMP _UxGT("Temp Ugello") #define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP #define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Modif Custom Mesh") #define MSG_UBL_FINE_TUNE_MESH _UxGT("Ritocca Mesh") #define MSG_UBL_DONE_EDITING_MESH _UxGT("Done Editing Mesh") #define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Crea Custom Mesh") #define MSG_UBL_BUILD_MESH_MENU _UxGT("Crea Mesh") #define MSG_UBL_BUILD_PLA_MESH _UxGT("Crea PLA Mesh") #define MSG_UBL_BUILD_ABS_MESH _UxGT("Crea ABS Mesh") #define MSG_UBL_BUILD_COLD_MESH _UxGT("Crea Cold Mesh") #define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Aggiusta Altezza Mesh") #define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Altezza") #define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Valida Mesh") #define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Valida PLA Mesh") #define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Valida ABS Mesh") #define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Valida Custom Mesh") #define MSG_UBL_CONTINUE_MESH _UxGT("Continua Mesh") #define MSG_UBL_MESH_LEVELING _UxGT("Livell. Mesh") #define MSG_UBL_3POINT_MESH_LEVELING _UxGT("Livell. 3 Punti") #define MSG_UBL_GRID_MESH_LEVELING _UxGT("Livell. Griglia Mesh") #define MSG_UBL_MESH_LEVEL _UxGT("Livella Mesh") #define MSG_UBL_SIDE_POINTS _UxGT("Punti laterali") #define MSG_UBL_MAP_TYPE _UxGT("Tipo di Mappa") #define MSG_UBL_OUTPUT_MAP _UxGT("Esporta Mappa") #define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Esporta per Host") #define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Esporta in CSV") #define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Backup esterno") #define MSG_UBL_INFO_UBL _UxGT("Esporta Info UBL") #define MSG_UBL_EDIT_MESH_MENU _UxGT("Modifica Mesh") #define MSG_UBL_FILLIN_AMOUNT _UxGT("Riempimento") #define MSG_UBL_MANUAL_FILLIN _UxGT("Riempimento Manuale") #define MSG_UBL_SMART_FILLIN _UxGT("Riempimento Smart") #define MSG_UBL_FILLIN_MESH _UxGT("Riempimento Mesh") #define MSG_UBL_INVALIDATE_ALL _UxGT("Invalida Tutto") #define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Invalida Punto Vicino") #define MSG_UBL_FINE_TUNE_ALL _UxGT("Ritocca All") #define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Ritocca Punto Vicino") #define MSG_UBL_STORAGE_MESH_MENU _UxGT("Mesh Salvate") #define MSG_UBL_STORAGE_SLOT _UxGT("Slot di memoria") #define MSG_UBL_LOAD_MESH _UxGT("Carica Mesh Piatto") #define MSG_UBL_SAVE_MESH _UxGT("Salva Mesh Piatto") #define MSG_UBL_SAVE_ERROR _UxGT("Err: Salvataggio UBL") #define MSG_UBL_RESTORE_ERROR _UxGT("Err: Ripristino UBL") #define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z-Offset Fermato") #define MSG_UBL_STEP_BY_STEP_MENU _UxGT("UBL passo passo") #define MSG_MOVING _UxGT("In movimento...") #define MSG_FREE_XY _UxGT("XY liberi") #define MSG_MOVE_X _UxGT("Muovi X") #define MSG_MOVE_Y _UxGT("Muovi Y") #define MSG_MOVE_Z _UxGT("Muovi Z") #define MSG_MOVE_E _UxGT("Estrusore") #define MSG_MOVE_01MM _UxGT("Muovi di 0.1mm") #define MSG_MOVE_1MM _UxGT("Muovi di 1mm") #define MSG_MOVE_10MM _UxGT("Muovi di 10mm") #define MSG_SPEED _UxGT("Velocità") #define MSG_BED_Z _UxGT("piatto Z") #define MSG_NOZZLE _UxGT("Ugello") #define MSG_BED _UxGT("Piatto") #define MSG_FAN_SPEED _UxGT("Velocità ventola") #define MSG_FLOW _UxGT("Flusso") #define MSG_CONTROL _UxGT("Controllo") #define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min") #define MSG_MAX LCD_STR_THERMOMETER _UxGT(" Max") #define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Fact") #define MSG_AUTOTEMP _UxGT("Autotemp") #define MSG_ON _UxGT("On ") #define MSG_OFF _UxGT("Off") #define MSG_PID_P _UxGT("PID-P") #define MSG_PID_I _UxGT("PID-I") #define MSG_PID_D _UxGT("PID-D") #define MSG_PID_C _UxGT("PID-C") #define MSG_SELECT _UxGT("Seleziona") #define MSG_ACC _UxGT("Accel") #define MSG_JERK _UxGT("Jerk") #define MSG_VX_JERK _UxGT("Vx-jerk") #define MSG_VY_JERK _UxGT("Vy-jerk") #define MSG_VZ_JERK _UxGT("Vz-jerk") #define MSG_VE_JERK _UxGT("Ve-jerk") #define MSG_VELOCITY _UxGT("Velocità") #define MSG_VMAX _UxGT("Vmax ") #define MSG_VMIN _UxGT("Vmin") #define MSG_VTRAV_MIN _UxGT("VTrav min") #define MSG_ACCELERATION _UxGT("Accelerazione") #define MSG_AMAX _UxGT("Amax ") #define MSG_A_RETRACT _UxGT("A-retract") #define MSG_A_TRAVEL _UxGT("A-Spostamento") #define MSG_STEPS_PER_MM _UxGT("Passi/mm") #define MSG_XSTEPS _UxGT("Xpassi/mm") #define MSG_YSTEPS _UxGT("Ypassi/mm") #define MSG_ZSTEPS _UxGT("Zpassi/mm") #define MSG_ESTEPS _UxGT("Epassi/mm") #define MSG_E1STEPS _UxGT("E1passi/mm") #define MSG_E2STEPS _UxGT("E2passi/mm") #define MSG_E3STEPS _UxGT("E3passi/mm") #define MSG_E4STEPS _UxGT("E4passi/mm") #define MSG_E5STEPS _UxGT("E5passi/mm") #define MSG_TEMPERATURE _UxGT("Temperatura") #define MSG_MOTION _UxGT("Movimento") #define MSG_FILAMENT _UxGT("Filamento") #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") #define MSG_FILAMENT_DIAM _UxGT("Diam. filo") #define MSG_ADVANCE_K _UxGT("K Avanzamento") #define MSG_CONTRAST _UxGT("Contrasto LCD") #define MSG_STORE_EEPROM _UxGT("Salva in memoria") #define MSG_LOAD_EEPROM _UxGT("Carica da memoria") #define MSG_RESTORE_FAILSAFE _UxGT("Ripristina imp.") #define MSG_INIT_EEPROM _UxGT("Inizializza EEPROM") #define MSG_REFRESH _UxGT("Aggiorna") #define MSG_WATCH _UxGT("Guarda") #define MSG_PREPARE _UxGT("Prepara") #define MSG_TUNE _UxGT("Regola") #define MSG_PAUSE_PRINT _UxGT("Pausa") #define MSG_RESUME_PRINT _UxGT("Riprendi stampa") #define MSG_STOP_PRINT _UxGT("Arresta stampa") #define MSG_CARD_MENU _UxGT("Stampa da SD") #define MSG_NO_CARD _UxGT("SD non presente") #define MSG_DWELL _UxGT("Sospensione...") #define MSG_USERWAIT _UxGT("Premi tasto..") #define MSG_PRINT_PAUSED _UxGT("Stampa sospesa") #define MSG_RESUMING _UxGT("Riprendi Stampa") #define MSG_PRINT_ABORTED _UxGT("Stampa annullata") #define MSG_NO_MOVE _UxGT("Nessun Movimento") #define MSG_KILLED _UxGT("UCCISO. ") #define MSG_STOPPED _UxGT("ARRESTATO. ") #define MSG_CONTROL_RETRACT _UxGT("Ritrai mm") #define MSG_CONTROL_RETRACT_SWAP _UxGT("Scamb. Ritrai mm") #define MSG_CONTROL_RETRACTF _UxGT("Ritrai V") #define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Salta mm") #define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm") #define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Scamb. UnRet mm") #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") #define MSG_AUTORETRACT _UxGT("AutoRitrai") #define MSG_FILAMENTCHANGE _UxGT("Cambia filamento") #define MSG_INIT_SDCARD _UxGT("Iniz. SD-Card") #define MSG_CNG_SDCARD _UxGT("Cambia SD-Card") #define MSG_ZPROBE_OUT _UxGT("Z probe out. bed") #define MSG_BLTOUCH _UxGT("BLTouch") #define MSG_BLTOUCH_SELFTEST _UxGT("Autotest BLTouch") #define MSG_BLTOUCH_RESET _UxGT("Resetta BLTouch") #define MSG_BLTOUCH_DEPLOY _UxGT("Estendi BLTouch") #define MSG_BLTOUCH_STOW _UxGT("Ritrai BLTouch") #define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST #define MSG_FIRST _UxGT("prima") #define MSG_ZPROBE_ZOFFSET _UxGT("Z Offset") #define MSG_BABYSTEP_X _UxGT("Babystep X") #define MSG_BABYSTEP_Y _UxGT("Babystep Y") #define MSG_BABYSTEP_Z _UxGT("Babystep Z") #define MSG_ENDSTOP_ABORT _UxGT("Finecorsa abort") #define MSG_HEATING_FAILED_LCD _UxGT("Riscald. Fallito") #define MSG_ERR_REDUNDANT_TEMP _UxGT("Err: TEMP RIDONDANTI") #define MSG_THERMAL_RUNAWAY _UxGT("TEMP FUORI CONTROLLO") #define MSG_ERR_MAXTEMP _UxGT("Err: TEMP MASSIMA") #define MSG_ERR_MINTEMP _UxGT("Err: TEMP MINIMA") #define MSG_ERR_MAXTEMP_BED _UxGT("Err: TEMP MASSIMA PIATTO") #define MSG_ERR_MINTEMP_BED _UxGT("Err: TEMP MINIMA PIATTO") #define MSG_ERR_Z_HOMING _UxGT("G28 Z Vietato") #define MSG_HALTED _UxGT("STAMPANTE FERMATA") #define MSG_PLEASE_RESET _UxGT("Riavviare prego") #define MSG_SHORT_DAY _UxGT("g") // One character only #define MSG_SHORT_HOUR _UxGT("h") // One character only #define MSG_SHORT_MINUTE _UxGT("m") // One character only #define MSG_HEATING _UxGT("Riscaldamento..") #define MSG_HEATING_COMPLETE _UxGT("Risc. completato") #define MSG_BED_HEATING _UxGT("Risc. Piatto..") #define MSG_BED_DONE _UxGT("Piatto Pronto") #define MSG_DELTA_CALIBRATE _UxGT("Calibraz. Delta") #define MSG_DELTA_CALIBRATE_X _UxGT("Calibra X") #define MSG_DELTA_CALIBRATE_Y _UxGT("Calibra Y") #define MSG_DELTA_CALIBRATE_Z _UxGT("Calibra Z") #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibra Center") #define MSG_DELTA_AUTO_CALIBRATE _UxGT("Auto calibrazione") #define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Imp. altezza Delta") #define MSG_INFO_MENU _UxGT("Riguardo stampante") #define MSG_INFO_PRINTER_MENU _UxGT("Info. stampante") #define MSG_3POINT_LEVELING _UxGT("Livel. a 3 punti") #define MSG_LINEAR_LEVELING _UxGT("Livel. Lineare") #define MSG_BILINEAR_LEVELING _UxGT("Livel. Biliniare") #define MSG_UBL_LEVELING _UxGT("Livel. UBL") #define MSG_MESH_LEVELING _UxGT("Livel. Mesh") #define MSG_INFO_STATS_MENU _UxGT("Statistiche") #define MSG_INFO_BOARD_MENU _UxGT("Info. scheda") #define MSG_INFO_THERMISTOR_MENU _UxGT("Termistori") #define MSG_INFO_EXTRUDERS _UxGT("Estrusori") #define MSG_INFO_BAUDRATE _UxGT("Baud") #define MSG_INFO_PROTOCOL _UxGT("Protocollo") #define MSG_CASE_LIGHT _UxGT("Luci Case") #define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Luminosità Luci") #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("Contat. stampa") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Completati") #define MSG_INFO_PRINT_TIME _UxGT("Tempo totale") #define MSG_INFO_PRINT_LONGEST _UxGT("Lavoro più lungo") #define MSG_INFO_PRINT_FILAMENT _UxGT("Totale estruso") #else #define MSG_INFO_PRINT_COUNT _UxGT("Stampe") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Completati") #define MSG_INFO_PRINT_TIME _UxGT("Durata") #define MSG_INFO_PRINT_LONGEST _UxGT("Più lungo") #define MSG_INFO_PRINT_FILAMENT _UxGT("Estruso") #endif #define MSG_INFO_MIN_TEMP _UxGT("Temp min") #define MSG_INFO_MAX_TEMP _UxGT("Temp max") #define MSG_INFO_PSU _UxGT("Alimentatore") #define MSG_DRIVE_STRENGTH _UxGT("Potenza Drive") #define MSG_DAC_PERCENT _UxGT("Driver %") #define MSG_DAC_EEPROM_WRITE _UxGT("Scrivi DAC EEPROM") #define MSG_FILAMENT_CHANGE_HEADER _UxGT("STAMPA IN PAUSA") #define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("OPZIONI:") #define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Estrudi ancora") #define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Riprendi stampa") #define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Temp minima è ") #define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Ugello: ") #if LCD_HEIGHT >= 4 // Up to 3 lines allowed #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Attendere avvio") #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("del cambio") #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("di filamento") #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Attendere") #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("l'espulsione") #define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("del filamento") #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Inserisci il") #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("filamento e") #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("premi per cont") #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Premi per") #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("riscald ugello.") #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Riscald. ugello") #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Attendere...") #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Attendere") #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("il caricamento") #define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("del filamento") #define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Attendere") #define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("l'estrusione") #define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("del filamento") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Attendere") #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("la ripresa") #define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("della stampa") #else // LCD_HEIGHT < 4 // Up to 2 lines allowed #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Attendere...") #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Espulsione...") #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Inserisci e premi") #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Riscaldamento...") #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Caricamento...") #define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Estrusione...") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Ripresa...") #endif // LCD_HEIGHT < 4 #endif // LANGUAGE_IT_H