<b>Microchip PIC Microcontrollers and other Devices</b><p>
Based on the following sources :
<ul>
<li>Microchip Data Book, 1993
<li>THE EMERGING WORLD STANDARD, 1995/1996
<li>Microchip, Technical Library CD-ROM, June 1998
<li>www.microchip.com
</ul>
<author>Created by librarian@cadsoft.de</author><B>Dual In Line</B><p>
package type P>NAME>VALUE<B>Dual In Line</B><p>
package type P>NAME>VALUE>NAME>VALUE>NAME>VALUE<b>USB Microcontrollers with nanoWatt Technology</b> High-Performance, Enhanced Flash, 28/40/44-Pin, <p>
Source: http://ww1.microchip.com/downloads/en/devicedoc/39632c.pdf<b>Stand-Alone Ethernet Controller with SPI Interface</b><p>
Source: http://ww1.microchip.com/downloads/en/DeviceDoc/39662c.pdf<b>Resistors, Capacitors, Inductors</b><p>
Based on the previous libraries:
<ul>
<li>r.lbr
<li>cap.lbr
<li>cap-fe.lbr
<li>captant.lbr
<li>polcap.lbr
<li>ipc-smd.lbr
</ul>
All SMD packages are defined according to the IPC specifications and CECC<p>
<author>Created by librarian@cadsoft.de</author><p>
<p>
for Electrolyt Capacitors see also :<p>
www.bccomponents.com <p>
www.panasonic.com<p>
www.kemet.com<p>
<p>
for trimmer refence see : <u>www.electrospec-inc.com/cross_references/trimpotcrossref.asp</u><p>
<map name="nav_main">
<area shape="rect" coords="0,1,140,23" href="../military_specs.asp" title="">
<area shape="rect" coords="0,24,140,51" href="../about.asp" title="">
<area shape="rect" coords="1,52,140,77" href="../rfq.asp" title="">
<area shape="rect" coords="0,78,139,103" href="../products.asp" title="">
<area shape="rect" coords="1,102,138,128" href="../excess_inventory.asp" title="">
<area shape="rect" coords="1,129,138,150" href="../edge.asp" title="">
<area shape="rect" coords="1,151,139,178" href="../industry_links.asp" title="">
<area shape="rect" coords="0,179,139,201" href="../comments.asp" title="">
<area shape="rect" coords="1,203,138,231" href="../directory.asp" title="">
<area shape="default" nohref>
</map>
<html>
<title></title>
<LINK REL="StyleSheet" TYPE="text/css" HREF="style-sheet.css">
<body bgcolor="#ffffff" text="#000000" marginwidth="0" marginheight="0" topmargin="0" leftmargin="0">
<table border=0 cellspacing=0 cellpadding=0 width="100%" cellpaddding=0 height="55%">
<tr valign="top">
</td>
<! <td width="10"> </td>
<td width="90%">
<b><font color="#0000FF" size="4">TRIM-POT CROSS REFERENCE</font></b>
<P>
<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=2>
<TR>
<TD COLSPAN=8>
<FONT SIZE=3 FACE=ARIAL><B>RECTANGULAR MULTI-TURN</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">BOURNS</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">BI TECH</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">DALE-VISHAY</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">PHILIPS/MEPCO</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">MURATA</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">PANASONIC</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">SPECTROL</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">MILSPEC</FONT>
</B>
</TD><TD> </TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3 >
3005P<BR>
3006P<BR>
3006W<BR>
3006Y<BR>
3009P<BR>
3009W<BR>
3009Y<BR>
3057J<BR>
3057L<BR>
3057P<BR>
3057Y<BR>
3059J<BR>
3059L<BR>
3059P<BR>
3059Y<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
89P<BR>
89W<BR>
89X<BR>
89PH<BR>
76P<BR>
89XH<BR>
78SLT<BR>
78L ALT<BR>
56P ALT<BR>
78P ALT<BR>
T8S<BR>
78L<BR>
56P<BR>
78P<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
T18/784<BR>
783<BR>
781<BR>
-<BR>
-<BR>
-<BR>
2199<BR>
1697/1897<BR>
1680/1880<BR>
2187<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
8035EKP/CT20/RJ-20P<BR>
-<BR>
RJ-20X<BR>
-<BR>
-<BR>
-<BR>
1211L<BR>
8012EKQ ALT<BR>
8012EKR ALT<BR>
1211P<BR>
8012EKJ<BR>
8012EKL<BR>
8012EKQ<BR>
8012EKR<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
2101P<BR>
2101W<BR>
2101Y<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
2102L<BR>
2102S<BR>
2102Y<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
EVMCOG<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
43P<BR>
43W<BR>
43Y<BR>
-<BR>
-<BR>
-<BR>
-<BR>
40L<BR>
40P<BR>
40Y<BR>
70Y-T602<BR>
70L<BR>
70P<BR>
70Y<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
RT/RTR12<BR>
RT/RTR12<BR>
RT/RTR12<BR>
-<BR>
RJ/RJR12<BR>
RJ/RJR12<BR>
RJ/RJR12<BR></FONT>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
<FONT SIZE=4 FACE=ARIAL><B>SQUARE MULTI-TURN</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3250L<BR>
3250P<BR>
3250W<BR>
3250X<BR>
3252P<BR>
3252W<BR>
3252X<BR>
3260P<BR>
3260W<BR>
3260X<BR>
3262P<BR>
3262W<BR>
3262X<BR>
3266P<BR>
3266W<BR>
3266X<BR>
3290H<BR>
3290P<BR>
3290W<BR>
3292P<BR>
3292W<BR>
3292X<BR>
3296P<BR>
3296W<BR>
3296X<BR>
3296Y<BR>
3296Z<BR>
3299P<BR>
3299W<BR>
3299X<BR>
3299Y<BR>
3299Z<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
66P ALT<BR>
66W ALT<BR>
66X ALT<BR>
66P ALT<BR>
66W ALT<BR>
66X ALT<BR>
-<BR>
64W ALT<BR>
-<BR>
64P ALT<BR>
64W ALT<BR>
64X ALT<BR>
64P<BR>
64W<BR>
64X<BR>
66X ALT<BR>
66P ALT<BR>
66W ALT<BR>
66P<BR>
66W<BR>
66X<BR>
67P<BR>
67W<BR>
67X<BR>
67Y<BR>
67Z<BR>
68P<BR>
68W<BR>
68X<BR>
67Y ALT<BR>
67Z ALT<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
5050<BR>
5091<BR>
5080<BR>
5087<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
T63YB<BR>
T63XB<BR>
-<BR>
-<BR>
-<BR>
5887<BR>
5891<BR>
5880<BR>
-<BR>
-<BR>
-<BR>
T93Z<BR>
T93YA<BR>
T93XA<BR>
T93YB<BR>
T93XB<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
8026EKP<BR>
8026EKW<BR>
8026EKM<BR>
8026EKP<BR>
8026EKB<BR>
8026EKM<BR>
1309X<BR>
1309P<BR>
1309W<BR>
8024EKP<BR>
8024EKW<BR>
8024EKN<BR>
RJ-9P/CT9P<BR>
RJ-9W<BR>
RJ-9X<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
3103P<BR>
3103Y<BR>
3103Z<BR>
3103P<BR>
3103Y<BR>
3103Z<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
3105P/3106P<BR>
3105W/3106W<BR>
3105X/3106X<BR>
3105Y/3106Y<BR>
3105Z/3105Z<BR>
3102P<BR>
3102W<BR>
3102X<BR>
3102Y<BR>
3102Z<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
EVMCBG<BR>
EVMCCG<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
55-1-X<BR>
55-4-X<BR>
55-3-X<BR>
55-2-X<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
50-2-X<BR>
50-4-X<BR>
50-3-X<BR>
-<BR>
-<BR>
-<BR>
64P<BR>
64W<BR>
64X<BR>
64Y<BR>
64Z<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
RT/RTR22<BR>
RT/RTR22<BR>
RT/RTR22<BR>
RT/RTR22<BR>
RJ/RJR22<BR>
RJ/RJR22<BR>
RJ/RJR22<BR>
RT/RTR26<BR>
RT/RTR26<BR>
RT/RTR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RT/RTR24<BR>
RT/RTR24<BR>
RT/RTR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
<FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3323P<BR>
3323S<BR>
3323W<BR>
3329H<BR>
3329P<BR>
3329W<BR>
3339H<BR>
3339P<BR>
3339W<BR>
3352E<BR>
3352H<BR>
3352K<BR>
3352P<BR>
3352T<BR>
3352V<BR>
3352W<BR>
3362H<BR>
3362M<BR>
3362P<BR>
3362R<BR>
3362S<BR>
3362U<BR>
3362W<BR>
3362X<BR>
3386B<BR>
3386C<BR>
3386F<BR>
3386H<BR>
3386K<BR>
3386M<BR>
3386P<BR>
3386S<BR>
3386W<BR>
3386X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
25P<BR>
25S<BR>
25RX<BR>
82P<BR>
82M<BR>
82PA<BR>
-<BR>
-<BR>
-<BR>
91E<BR>
91X<BR>
91T<BR>
91B<BR>
91A<BR>
91V<BR>
91W<BR>
25W<BR>
25V<BR>
25P<BR>
-<BR>
25S<BR>
25U<BR>
25RX<BR>
25X<BR>
72XW<BR>
72XL<BR>
72PM<BR>
72RX<BR>
-<BR>
72PX<BR>
72P<BR>
72RXW<BR>
72RXL<BR>
72X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
T7YB<BR>
T7YA<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
TXD<BR>
TYA<BR>
TYP<BR>
-<BR>
TYD<BR>
TX<BR>
-<BR>
150SX<BR>
100SX<BR>
102T<BR>
101S<BR>
190T<BR>
150TX<BR>
101<BR>
-<BR>
-<BR>
101SX<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
ET6P<BR>
ET6S<BR>
ET6X<BR>
RJ-6W/8014EMW<BR>
RJ-6P/8014EMP<BR>
RJ-6X/8014EMX<BR>
TM7W<BR>
TM7P<BR>
TM7X<BR>
-<BR>
8017SMS<BR>
-<BR>
8017SMB<BR>
8017SMA<BR>
-<BR>
-<BR>
CT-6W<BR>
CT-6H<BR>
CT-6P<BR>
CT-6R<BR>
-<BR>
CT-6V<BR>
CT-6X<BR>
-<BR>
-<BR>
8038EKV<BR>
-<BR>
8038EKX<BR>
-<BR>
-<BR>
8038EKP<BR>
8038EKZ<BR>
8038EKW<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
3321H<BR>
3321P<BR>
3321N<BR>
1102H<BR>
1102P<BR>
1102T<BR>
RVA0911V304A<BR>
-<BR>
RVA0911H413A<BR>
RVG0707V100A<BR>
RVA0607V(H)306A<BR>
RVA1214H213A<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
3104B<BR>
3104C<BR>
3104F<BR>
3104H<BR>
-<BR>
3104M<BR>
3104P<BR>
3104S<BR>
3104W<BR>
3104X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
EVMQ0G<BR>
EVMQIG<BR>
EVMQ3G<BR>
EVMS0G<BR>
EVMQ0G<BR>
EVMG0G<BR>
-<BR>
-<BR>
-<BR>
EVMK4GA00B<BR>
EVM30GA00B<BR>
EVMK0GA00B<BR>
EVM38GA00B<BR>
EVMB6<BR>
EVLQ0<BR>
-<BR>
EVMMSG<BR>
EVMMBG<BR>
EVMMAG<BR>
-<BR>
-<BR>
EVMMCS<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
EVMM1<BR>
-<BR>
-<BR>
EVMM0<BR>
-<BR>
-<BR>
EVMM3<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
62-3-1<BR>
62-1-2<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
67R<BR>
-<BR>
67P<BR>
-<BR>
-<BR>
-<BR>
-<BR>
67X<BR>
63V<BR>
63S<BR>
63M<BR>
-<BR>
-<BR>
63H<BR>
63P<BR>
-<BR>
-<BR>
63X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
RJ/RJR50<BR>
RJ/RJR50<BR>
RJ/RJR50<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
</TABLE>
<P> <P>
<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=3>
<TR>
<TD COLSPAN=7>
<FONT color="#0000FF" SIZE=4 FACE=ARIAL><B>SMD TRIM-POT CROSS REFERENCE</B></FONT>
<P>
<FONT SIZE=4 FACE=ARIAL><B>MULTI-TURN</B></FONT>
</TD>
</TR>
<TR>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3224G<BR>
3224J<BR>
3224W<BR>
3269P<BR>
3269W<BR>
3269X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
44G<BR>
44J<BR>
44W<BR>
84P<BR>
84W<BR>
84X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
ST63Z<BR>
ST63Y<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
ST5P<BR>
ST5W<BR>
ST5X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
<TR>
<TD COLSPAN=7>
</TD>
</TR>
<TR>
<TD COLSPAN=7>
<FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT>
</TD>
</TR>
<TR>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3314G<BR>
3314J<BR>
3364A/B<BR>
3364C/D<BR>
3364W/X<BR>
3313G<BR>
3313J<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
23B<BR>
23A<BR>
21X<BR>
21W<BR>
-<BR>
22B<BR>
22A<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
ST5YL/ST53YL<BR>
ST5YJ/5T53YJ<BR>
ST-23A<BR>
ST-22B<BR>
ST-22<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
ST-4B<BR>
ST-4A<BR>
-<BR>
-<BR>
-<BR>
ST-3B<BR>
ST-3A<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
EVM-6YS<BR>
EVM-1E<BR>
EVM-1G<BR>
EVM-1D<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
G4B<BR>
G4A<BR>
TR04-3S1<BR>
TRG04-2S1<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
DVR-43A<BR>
CVR-42C<BR>
CVR-42A/C<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
</TABLE>
<P>
<FONT SIZE=4 FACE=ARIAL><B>ALT = ALTERNATE</B></FONT>
<P>
<P>
</td>
</tr>
</table>
</BODY></HTML><b>RESISTOR</b><p>
chip>NAME>VALUE<b>RESISTOR</b><p>
chip>NAME>VALUE<b>RESISTOR</b><p>
chip>NAME>VALUE<b>RESISTOR</b><p>
chip, wave soldering>NAME>VALUE<b>RESISTOR</b><p>
chip>NAME>VALUE<b>RESISTOR</b><p>
chip>NAME>VALUE<b>RESISTOR</b><p>
chip, wave soldering>NAME>VALUE<b>RESISTOR</b><p>
chip>NAME>VALUE<b>RESISTOR</b><p>
chip, wave soldering>NAME>VALUE<b>RESISTOR</b><p>
chip>NAME>VALUE<b>RESISTOR</b><p>
chip, wave soldering>NAME>VALUE<b>RESISTOR</b><p>
chip>NAME>VALUE<b>RESISTOR</b><p>
chip, wave soldering>NAME>VALUE<b>RESISTOR</b><p>
chip>NAME>VALUE<b>RESISTOR</b><p>
chip, wave soldering>NAME>VALUE<b>RESISTOR</b><p>
chip>NAME>VALUE<b>RESISTOR</b><p>
chip, wave soldering>NAME>VALUE<b>RESISTOR</b><p>
chip>NAME>VALUE<b>RESISTOR</b><p>
chip, wave soldering>NAME>VALUE<b>RESISTOR</b><p>
chip>NAME>VALUE<b>RESISTOR</b><p>
chip, wave soldering>NAME>VALUE<b>RESISTOR</b><p>
chip>NAME>VALUE<b>RESISTOR</b><p>
chip, wave soldering>NAME>VALUE<b>RESISTOR</b><p>
MELF 0.10 W>NAME>VALUE<b>RESISTOR</b><p>
MELF 0.25 W>NAME>VALUE<b>RESISTOR</b><p>
MELF 0.12 W>NAME>VALUE<b>RESISTOR</b><p>
MELF 0.10 W>NAME>VALUE<b>RESISTOR</b><p>
MELF 0.25 W>NAME>VALUE<b>RESISTOR</b><p>
MELF 0.25 W>NAME>VALUE<b>RESISTOR</b><p>
MELF 0.12 W>NAME>VALUE<b>RESISTOR</b><p>
MELF 0.25 W>NAME>VALUE<b>RESISTOR</b><p>
type 0204, grid 5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0204, grid 7.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0207, grid 10 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0207, grid 12 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0207, grid 15mm>NAME>VALUE<b>RESISTOR</b><p>
type 0207, grid 2.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0207, grid 5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0207, grid 7.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0309, grid 10mm>NAME>VALUE<b>RESISTOR</b><p>
type 0309, grid 12.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0411, grid 12.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0411, grid 15 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0411, grid 3.81 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0414, grid 15 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0414, grid 5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0617, grid 17.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0617, grid 22.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0617, grid 5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0922, grid 22.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0613, grid 5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0613, grid 15 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0817, grid 22.5 mm>NAME>VALUE0817<b>RESISTOR</b><p>
type 0817, grid 6.35 mm>NAME>VALUE0817<b>RESISTOR</b><p>
type V234, grid 12.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type V235, grid 17.78 mm>NAME>VALUE<b>RESISTOR</b><p>
type V526-0, grid 2.5 mm>NAME>VALUE<b>Mini MELF 0102 Axial</b>>NAME>VALUE<b>RESISTOR</b><p>
type 0922, grid 7.5 mm>NAME>VALUE0922<b>CECC Size RC2211</b> Reflow Soldering<p>
source Beyschlag>NAME>VALUE<b>CECC Size RC2211</b> Wave Soldering<p>
source Beyschlag>NAME>VALUE<b>CECC Size RC3715</b> Reflow Soldering<p>
source Beyschlag>NAME>VALUE<b>CECC Size RC3715</b> Wave Soldering<p>
source Beyschlag>NAME>VALUE<b>CECC Size RC6123</b> Reflow Soldering<p>
source Beyschlag>NAME>VALUE<b>CECC Size RC6123</b> Wave Soldering<p>
source Beyschlag>NAME>VALUE<b>RESISTOR</b><p>
type RDH, grid 15 mm>NAME>VALUERDH<b>RESISTOR</b><p>
type 0204, grid 2.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0309, grid 2.5 mm>NAME>VALUE>NAME>VALUE<B>RESISTOR</B>, American symbol<b>Supply Symbols</b><p>
GND, VCC, 0V, +5V, -5V, etc.<p>
Please keep in mind, that these devices are necessary for the
automatic wiring of the supply signals.<p>
The pin name defined in the symbol is identical to the net which is to be wired automatically.<p>
In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p>
<author>Created by librarian@cadsoft.de</author>>VALUE<b>SUPPLY SYMBOL</b><b>Supply Symbols</b><p>
GND, VCC, 0V, +5V, -5V, etc.<p>
Please keep in mind, that these devices are necessary for the
automatic wiring of the supply signals.<p>
The pin name defined in the symbol is identical to the net which is to be wired automatically.<p>
In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p>
<author>Created by librarian@cadsoft.de</author>>VALUE<b>SUPPLY SYMBOL</b><h3>SparkFun Electronics' preferred foot prints</h3>
In this library you'll find connectors and sockets- basically anything that can be plugged into or onto.<br><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br><br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.>NAME>VALUE>NAME>VALUE>NAME>NAME>VALUE//kentro/work/Production/AOI Parts/Tyler/Breadboard power 5v/barreljack.bmp//kentro/work/Production/AOI Parts/Tyler/Breadboard power 5v/barreljack.bmp<h1>DC Barrel Jack Adapter - Breadboard Compatible</h1>
<h2>PRT-10811</h2>>NAME>VALUE<b>USB Series A Hole Mounted</b>>NAMEPCB Edge<b>USB Series A Surface Mounted</b>>NAME<b>USB Series Mini-B Hole Mounted</b>>NAMEUSB Series B Surface Mounted>NAME<b>USB Series Mini-B Surface Mounted</b>>VALUE>NAME<b>USB Series B Hole Mounted</b>>NAME>VALUE<b>USB Series Mini-B Surface Mounted</b>>NAME>VALUECard-edge USB A connector.
For boards designed to be plugged directly into a USB slot. If possible, ensure that your PCB is about 2.4mm thick to fit snugly.>Name>ValueCard edge<b>USB Series B Hole Mounted</b>>NAME>VALUE>NAME>NAME>NAME>VALUE>NAME>VALUEMicro USB Package>NAME>VALUE>NAMEPCB Edge>NAMEPCB Edge>NAME>VALUE>NAME>VALUEThis footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place.
You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line).
This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace"
to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers.
Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,
if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment
will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins.>NAME>VALUEThis footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place.
You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line).
This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace"
to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers.
Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,
if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment
will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins.>NAME>VALUEThis footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place.
You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line).
This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace"
to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers.
Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,
if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment
will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins.>NAME>VALUE>NAME>VALUEThis footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place.
You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line).
This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace"
to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers.
Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,
if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment
will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins.>NAME>VALUE>NAME>VALUE>NAME>VALUEthru-hole vertical Female Headerused as an SMD part (placed horizontally, at board's edge)>NAME>VALUEPackage for 4UCONN part #19686 *UNPROVEN*>Value>Name>NAME>VALUE>NAME>VALUE>NAME>VALUEBritish Telecom connector, used for Vernier sensors (analog)>NAMEBritish Telecom connector, used for Vernier sensors (digital)>Name>NAME>VALUEWorks with part #579 (https://www.sparkfun.com/products/579). Commonly used on GPS modules EM408, EM406 and GP-635T. Also compatible with cable 9123 (https://www.sparkfun.com/products/9123) and cable 574 (https://www.sparkfun.com/products/574).>Name>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE2mm SMD side-entry connector. tDocu layer indicates the actual physical plastic housing. +/- indicate SparkFun standard batteries and wiring.>Name>Value>TOP_NEG>BTM_NEG>TOP_POS>BTM_POS>Name>Value>NAME>VALUE>NAME>VALUEThis footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place.
You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line).
This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace"
to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers.
Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,
if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment
will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins.>NAME>VALUE>NAME>VALUE>NAME>VALUE>Name>Value+->NAME>VALUE>Name>Value+-<H3>JST-2-PTH-KIT</h3>
2-Pin JST, through-hole connector<br>
<br>
<b>Warning:</b> This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.>Name>Value+->Name>Value+->NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUEThis footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place.
You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line).
This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace"
to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers.
Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,
if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment
will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins.>NAME>VALUE>NAME>VALUE>NAME>VALUE>Name>Value+-SS>NAME>VALUE>NAME>VALUE>NAME>VALUE>Name>Value+-YB>Value>Name>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUEJST crimp connector: 1mm pitch, top entry>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUEThis footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place.
You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line).
This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace"
to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers.
Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,
if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment
will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins.>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>Name>Value+-S>NAME>VALUE>NAME>VALUE>Name>Value>NAME>VALUE>Value>Name<h3>SMD 3-Pin Male Right-Angle Header w/ Alignment posts</h3>
Matches 4UCONN part # 11026<br>
<a href="http://www.4uconnector.com/online/object/4udrawing/11026.pdf">http://www.4uconnector.com/online/object/4udrawing/11026.pdf</a>This 3-pin connector mates with the JST cable sold on SparkFun.>Name>Value+-S>NAME>VALUEHeader for OS4000-T>NAME>VALUE>NAME>VALUEThis footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place.
You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line).
This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace"
to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers.
Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,
if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment
will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins.>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUENo outline in silkscreen>NAME>VALUE>Name>Value>Name>Value>NAME>VALUE>Value>NameUSB>NAME>VALUE>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME<b>Power Jack</b>
This is the standard 5.5mm barrel jack for power.<br>
The PTH is the most common, proven, reliable, footprint.<br>
The Slot footprint only works if the mill layer is transmitted to the PCB fab house so be warned.<br>
Mating wall wart : TOL-00298 (and others)<b>USB Connectors</b>
<p>USB-B-PTH is fully proven SKU : PRT-00139/CONN-08278
<p>USB-miniB is fully proven SKU : PRT-00587
<p>USB-A-PCB is untested.
<p>USB-A-H is throughly reviewed, but untested. Spark Fun Electronics SKU : PRT-00437
<p>USB-B-SMT is throughly reviewed, but untested. Needs silkscreen touching up.
<p>USB-A-S has not been used/tested
<p>USB-MB-H has not been used/tested
<P>USB-MICROB has been used. CONN-09505<b>Header 6</b><br>
Standard 6-pin 0.1" header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115). Molex polarized connector foot print use with SKU : PRT-08094 with associated crimp pins and housings.<p>
NOTES ON THE VARIANTS LOCK and LOCK_LONGPADS...
This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment
will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins.<b>Header 9</b>
Standard 9-pin 0.1" header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115).Standard 2-pin 0.1" header. Use with <br>
- straight break away headers ( PRT-00116)<br>
- right angle break away headers (PRT-00553)<br>
- swiss pins (PRT-00743)<br>
- machine pins (PRT-00117)<br>
- female headers (PRT-00115)<br><br>
Molex polarized connector foot print use with: PRT-08233 with associated crimp pins and housings.<br><br>
2.54_SCREWTERM for use with PRT-10571.<br><br>
3.5mm Screw Terminal footprints for PRT-08084<br><br>
5mm Screw Terminal footprints for use with PRT-08432<b>Header 4</b>
Standard 4-pin 0.1" header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115). Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208<b>Header 10</b>
Standard 10-pin 0.1" header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115).<b>Header 8</b>
Standard 8-pin 0.1" header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115).<b>Header 3</b>
Standard 3-pin 0.1" header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115). Molex polarized connector foot print use with SKU : PRT-08232 with associated crimp pins and housings.<b>Header 5</b>
Standard 5-pin 0.1" header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115). Molex polarized connector foot print use with SKU : PRT-08230 with associated crimp pins and housings..1" header, two rows of four.<b>Resistors, Capacitors, Inductors</b><p>
Based on the previous libraries:
<ul>
<li>r.lbr
<li>cap.lbr
<li>cap-fe.lbr
<li>captant.lbr
<li>polcap.lbr
<li>ipc-smd.lbr
</ul>
All SMD packages are defined according to the IPC specifications and CECC<p>
<author>Created by librarian@cadsoft.de</author><p>
<p>
for Electrolyt Capacitors see also :<p>
www.bccomponents.com <p>
www.panasonic.com<p>
www.kemet.com<p>
http://www.secc.co.jp/pdf/os_e/2004/e_os_all.pdf <b>(SANYO)</b>
<p>
for trimmer refence see : <u>www.electrospec-inc.com/cross_references/trimpotcrossref.asp</u><p>
<table border=0 cellspacing=0 cellpadding=0 width="100%" cellpaddding=0>
<tr valign="top">
<! <td width="10"> </td>
<td width="90%">
<b><font color="#0000FF" size="4">TRIM-POT CROSS REFERENCE</font></b>
<P>
<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=2>
<TR>
<TD COLSPAN=8>
<FONT SIZE=3 FACE=ARIAL><B>RECTANGULAR MULTI-TURN</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">BOURNS</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">BI TECH</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">DALE-VISHAY</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">PHILIPS/MEPCO</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">MURATA</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">PANASONIC</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">SPECTROL</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">MILSPEC</FONT>
</B>
</TD><TD> </TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3 >
3005P<BR>
3006P<BR>
3006W<BR>
3006Y<BR>
3009P<BR>
3009W<BR>
3009Y<BR>
3057J<BR>
3057L<BR>
3057P<BR>
3057Y<BR>
3059J<BR>
3059L<BR>
3059P<BR>
3059Y<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
89P<BR>
89W<BR>
89X<BR>
89PH<BR>
76P<BR>
89XH<BR>
78SLT<BR>
78L ALT<BR>
56P ALT<BR>
78P ALT<BR>
T8S<BR>
78L<BR>
56P<BR>
78P<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
T18/784<BR>
783<BR>
781<BR>
-<BR>
-<BR>
-<BR>
2199<BR>
1697/1897<BR>
1680/1880<BR>
2187<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
8035EKP/CT20/RJ-20P<BR>
-<BR>
RJ-20X<BR>
-<BR>
-<BR>
-<BR>
1211L<BR>
8012EKQ ALT<BR>
8012EKR ALT<BR>
1211P<BR>
8012EKJ<BR>
8012EKL<BR>
8012EKQ<BR>
8012EKR<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
2101P<BR>
2101W<BR>
2101Y<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
2102L<BR>
2102S<BR>
2102Y<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
EVMCOG<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
43P<BR>
43W<BR>
43Y<BR>
-<BR>
-<BR>
-<BR>
-<BR>
40L<BR>
40P<BR>
40Y<BR>
70Y-T602<BR>
70L<BR>
70P<BR>
70Y<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
RT/RTR12<BR>
RT/RTR12<BR>
RT/RTR12<BR>
-<BR>
RJ/RJR12<BR>
RJ/RJR12<BR>
RJ/RJR12<BR></FONT>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
<FONT SIZE=4 FACE=ARIAL><B>SQUARE MULTI-TURN</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3250L<BR>
3250P<BR>
3250W<BR>
3250X<BR>
3252P<BR>
3252W<BR>
3252X<BR>
3260P<BR>
3260W<BR>
3260X<BR>
3262P<BR>
3262W<BR>
3262X<BR>
3266P<BR>
3266W<BR>
3266X<BR>
3290H<BR>
3290P<BR>
3290W<BR>
3292P<BR>
3292W<BR>
3292X<BR>
3296P<BR>
3296W<BR>
3296X<BR>
3296Y<BR>
3296Z<BR>
3299P<BR>
3299W<BR>
3299X<BR>
3299Y<BR>
3299Z<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
66P ALT<BR>
66W ALT<BR>
66X ALT<BR>
66P ALT<BR>
66W ALT<BR>
66X ALT<BR>
-<BR>
64W ALT<BR>
-<BR>
64P ALT<BR>
64W ALT<BR>
64X ALT<BR>
64P<BR>
64W<BR>
64X<BR>
66X ALT<BR>
66P ALT<BR>
66W ALT<BR>
66P<BR>
66W<BR>
66X<BR>
67P<BR>
67W<BR>
67X<BR>
67Y<BR>
67Z<BR>
68P<BR>
68W<BR>
68X<BR>
67Y ALT<BR>
67Z ALT<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
5050<BR>
5091<BR>
5080<BR>
5087<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
T63YB<BR>
T63XB<BR>
-<BR>
-<BR>
-<BR>
5887<BR>
5891<BR>
5880<BR>
-<BR>
-<BR>
-<BR>
T93Z<BR>
T93YA<BR>
T93XA<BR>
T93YB<BR>
T93XB<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
8026EKP<BR>
8026EKW<BR>
8026EKM<BR>
8026EKP<BR>
8026EKB<BR>
8026EKM<BR>
1309X<BR>
1309P<BR>
1309W<BR>
8024EKP<BR>
8024EKW<BR>
8024EKN<BR>
RJ-9P/CT9P<BR>
RJ-9W<BR>
RJ-9X<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
3103P<BR>
3103Y<BR>
3103Z<BR>
3103P<BR>
3103Y<BR>
3103Z<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
3105P/3106P<BR>
3105W/3106W<BR>
3105X/3106X<BR>
3105Y/3106Y<BR>
3105Z/3105Z<BR>
3102P<BR>
3102W<BR>
3102X<BR>
3102Y<BR>
3102Z<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
EVMCBG<BR>
EVMCCG<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
55-1-X<BR>
55-4-X<BR>
55-3-X<BR>
55-2-X<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
50-2-X<BR>
50-4-X<BR>
50-3-X<BR>
-<BR>
-<BR>
-<BR>
64P<BR>
64W<BR>
64X<BR>
64Y<BR>
64Z<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
RT/RTR22<BR>
RT/RTR22<BR>
RT/RTR22<BR>
RT/RTR22<BR>
RJ/RJR22<BR>
RJ/RJR22<BR>
RJ/RJR22<BR>
RT/RTR26<BR>
RT/RTR26<BR>
RT/RTR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RT/RTR24<BR>
RT/RTR24<BR>
RT/RTR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
<FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3323P<BR>
3323S<BR>
3323W<BR>
3329H<BR>
3329P<BR>
3329W<BR>
3339H<BR>
3339P<BR>
3339W<BR>
3352E<BR>
3352H<BR>
3352K<BR>
3352P<BR>
3352T<BR>
3352V<BR>
3352W<BR>
3362H<BR>
3362M<BR>
3362P<BR>
3362R<BR>
3362S<BR>
3362U<BR>
3362W<BR>
3362X<BR>
3386B<BR>
3386C<BR>
3386F<BR>
3386H<BR>
3386K<BR>
3386M<BR>
3386P<BR>
3386S<BR>
3386W<BR>
3386X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
25P<BR>
25S<BR>
25RX<BR>
82P<BR>
82M<BR>
82PA<BR>
-<BR>
-<BR>
-<BR>
91E<BR>
91X<BR>
91T<BR>
91B<BR>
91A<BR>
91V<BR>
91W<BR>
25W<BR>
25V<BR>
25P<BR>
-<BR>
25S<BR>
25U<BR>
25RX<BR>
25X<BR>
72XW<BR>
72XL<BR>
72PM<BR>
72RX<BR>
-<BR>
72PX<BR>
72P<BR>
72RXW<BR>
72RXL<BR>
72X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
T7YB<BR>
T7YA<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
TXD<BR>
TYA<BR>
TYP<BR>
-<BR>
TYD<BR>
TX<BR>
-<BR>
150SX<BR>
100SX<BR>
102T<BR>
101S<BR>
190T<BR>
150TX<BR>
101<BR>
-<BR>
-<BR>
101SX<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
ET6P<BR>
ET6S<BR>
ET6X<BR>
RJ-6W/8014EMW<BR>
RJ-6P/8014EMP<BR>
RJ-6X/8014EMX<BR>
TM7W<BR>
TM7P<BR>
TM7X<BR>
-<BR>
8017SMS<BR>
-<BR>
8017SMB<BR>
8017SMA<BR>
-<BR>
-<BR>
CT-6W<BR>
CT-6H<BR>
CT-6P<BR>
CT-6R<BR>
-<BR>
CT-6V<BR>
CT-6X<BR>
-<BR>
-<BR>
8038EKV<BR>
-<BR>
8038EKX<BR>
-<BR>
-<BR>
8038EKP<BR>
8038EKZ<BR>
8038EKW<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
3321H<BR>
3321P<BR>
3321N<BR>
1102H<BR>
1102P<BR>
1102T<BR>
RVA0911V304A<BR>
-<BR>
RVA0911H413A<BR>
RVG0707V100A<BR>
RVA0607V(H)306A<BR>
RVA1214H213A<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
3104B<BR>
3104C<BR>
3104F<BR>
3104H<BR>
-<BR>
3104M<BR>
3104P<BR>
3104S<BR>
3104W<BR>
3104X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
EVMQ0G<BR>
EVMQIG<BR>
EVMQ3G<BR>
EVMS0G<BR>
EVMQ0G<BR>
EVMG0G<BR>
-<BR>
-<BR>
-<BR>
EVMK4GA00B<BR>
EVM30GA00B<BR>
EVMK0GA00B<BR>
EVM38GA00B<BR>
EVMB6<BR>
EVLQ0<BR>
-<BR>
EVMMSG<BR>
EVMMBG<BR>
EVMMAG<BR>
-<BR>
-<BR>
EVMMCS<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
EVMM1<BR>
-<BR>
-<BR>
EVMM0<BR>
-<BR>
-<BR>
EVMM3<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
62-3-1<BR>
62-1-2<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
67R<BR>
-<BR>
67P<BR>
-<BR>
-<BR>
-<BR>
-<BR>
67X<BR>
63V<BR>
63S<BR>
63M<BR>
-<BR>
-<BR>
63H<BR>
63P<BR>
-<BR>
-<BR>
63X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
RJ/RJR50<BR>
RJ/RJR50<BR>
RJ/RJR50<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
</TABLE>
<P> <P>
<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=3>
<TR>
<TD COLSPAN=7>
<FONT color="#0000FF" SIZE=4 FACE=ARIAL><B>SMD TRIM-POT CROSS REFERENCE</B></FONT>
<P>
<FONT SIZE=4 FACE=ARIAL><B>MULTI-TURN</B></FONT>
</TD>
</TR>
<TR>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3224G<BR>
3224J<BR>
3224W<BR>
3269P<BR>
3269W<BR>
3269X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
44G<BR>
44J<BR>
44W<BR>
84P<BR>
84W<BR>
84X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
ST63Z<BR>
ST63Y<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
ST5P<BR>
ST5W<BR>
ST5X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
<TR>
<TD COLSPAN=7>
</TD>
</TR>
<TR>
<TD COLSPAN=7>
<FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT>
</TD>
</TR>
<TR>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3314G<BR>
3314J<BR>
3364A/B<BR>
3364C/D<BR>
3364W/X<BR>
3313G<BR>
3313J<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
23B<BR>
23A<BR>
21X<BR>
21W<BR>
-<BR>
22B<BR>
22A<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
ST5YL/ST53YL<BR>
ST5YJ/5T53YJ<BR>
ST-23A<BR>
ST-22B<BR>
ST-22<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
ST-4B<BR>
ST-4A<BR>
-<BR>
-<BR>
-<BR>
ST-3B<BR>
ST-3A<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
EVM-6YS<BR>
EVM-1E<BR>
EVM-1G<BR>
EVM-1D<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
G4B<BR>
G4A<BR>
TR04-3S1<BR>
TRG04-2S1<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
DVR-43A<BR>
CVR-42C<BR>
CVR-42A/C<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
</TABLE>
<P>
<FONT SIZE=4 FACE=ARIAL><B>ALT = ALTERNATE</B></FONT>
<P>
<P>
</td>
</tr>
</table><b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b><p>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm, outline 2.4 x 4.4 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm, outline 2.5 x 5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm, outline 3 x 5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm, outline 4 x 5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm, outline 5 x 5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm, outline 6 x 5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm + 5 mm, outline 2.4 x 7 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 2.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 3.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 4.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 5.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 2.4 x 4.4 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 2.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 4.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 3 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 5.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 7.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
Horizontal, grid 5 mm, outline 7.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 7.5 mm, outline 3.2 x 10.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 7.5 mm, outline 4.2 x 10.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 7.5 mm, outline 5.2 x 10.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 10.2 mm, outline 4.3 x 13.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 10.2 mm, outline 5.4 x 13.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 10.2 mm, outline 6.4 x 13.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 10.2 mm + 15.2 mm, outline 6.2 x 18.4 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 15 mm, outline 5.4 x 18.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 15 mm, outline 6.4 x 18.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 15 mm, outline 7.2 x 18.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 15 mm, outline 8.4 x 18.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 15 mm, outline 9.1 x 18.2 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 22.5 mm, outline 6.2 x 26.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 22.5 mm, outline 7.4 x 26.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 22.5 mm, outline 8.7 x 26.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 22.5 mm, outline 10.8 x 26.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 22.5 mm, outline 11.3 x 26.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 27.5 mm, outline 9.3 x 31.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 27.5 mm, outline 11.3 x 31.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 27.5 mm, outline 13.4 x 31.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 27.5 mm, outline 20.5 x 31.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 32.5 mm, outline 13.7 x 37.4 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 32.5 mm, outline 16.2 x 37.4 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 32.5 mm, outline 18.2 x 37.4 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 37.5 mm, outline 19.2 x 41.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 37.5 mm, outline 20.3 x 41.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 3.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 37.5 mm, outline 15.5 x 41.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 7.5 mm, outline 6.3 x 10.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 27.5 mm, outline 15.4 x 31.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 27.5 mm, outline 17.3 x 31.6 mm>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 0204 reflow solder</b><p>
Metric Code Size 1005>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 0603 reflow solder</b><p>
Metric Code Size 1608>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 0805 reflow solder</b><p>
Metric Code Size 2012>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 1206 reflow solder</b><p>
Metric Code Size 3216>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 1210 reflow solder</b><p>
Metric Code Size 3225>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 1812 reflow solder</b><p>
Metric Code Size 4532>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 1825 reflow solder</b><p>
Metric Code Size 4564>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 2220 reflow solder</b><p>Metric Code Size 5650>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 2225 reflow solder</b><p>Metric Code Size 5664>NAME>VALUE<b> </b><p>
Source: http://www.vishay.com/docs/10129/hpc0201a.pdf>NAME>VALUESource: http://www.avxcorp.com/docs/catalogs/cx5r.pdf>NAME>VALUE<b>CAPACITOR</b><p>
Source: AVX .. aphvc.pdf>NAME>VALUE<b>CAPACITOR</b><p>
Source: AVX .. aphvc.pdf>NAME>VALUE>NAME>VALUE<B>CAPACITOR</B>, European symbol>NAME<b>CRYSTAL</b>>NAME>VALUE<b>CRYSTAL</b>>NAME>VALUE<b>CRYSTAL</b>>NAME>VALUE<b>CRYSTAL</b>>NAME>VALUE<b>CRYSTAL</b>>NAME>VALUE<b>CRYSTAL</b>>NAME>VALUE<b>CRYSTAL</b>>NAME>VALUE<b>CRYSTAL</b>>NAME>VALUE<b>CRYSTAL</b>>NAME>VALUE<b>CRYSTAL</b>>NAME>VALUE<b>CRYSTAL</b>>NAME>VALUE<b>CRYSTAL</b>>NAME>VALUE<b>CRYSTAL</b>>NAME>VALUE<b>CRYSTAL</b>>NAME>VALUE<b>CRYSTAL</b>>NAME>VALUE<b>CRYSTAL</b>>NAME>VALUE<b>CRYSTAL</b>>NAME>VALUE<b>CRYSTAL RESONATOR</b>>NAME>VALUE<b>CRYSTAL</b>>NAME>VALUE<b>CRYSTAL</b>>NAME>VALUE<b>Model 406 6.0x3.5mm Low Cost Surface Mount Crystal</b><p>
Source: 008-0260-0_E.pdf>NAME>VALUE>NAME>VALUE>NAME>VALUE12<b>Ferrite bead</b>
<p>
Digikey #P9821BK-ND<b>CRYSTAL</b><h3>SparkFun Electronics' preferred foot prints</h3>
In this library you'll find drivers, regulators, and amplifiers.<br><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br><br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<b>SOT-223</b>>NAME>VALUE>NAME>VALUEADJINOUTOUT<b>Voltage Regulator LM1117</b>
Standard adjustable voltage regulator but in SMD form. Spark Fun Electronics SKU : COM-00595<h3>SparkFun Electronics' preferred foot prints</h3>
In this library you'll find anything that moves- switches, relays, buttons, potentiometers. Also, anything that goes on a board but isn't electrical in nature- screws, standoffs, etc.<br><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br><br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<b>OMRON SWITCH</b>>NAME>NAME>ValueSparkFun SKU# COM-08229>NAME>VALUE>NAME>NAME>NAME>Value>NAME>NAME>VALUEVarious NO switches- pushbuttons, reed, etc<h3>SparkFun Electronics' preferred foot prints</h3>
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.<br><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br><br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.>NAME>VALUE>NAME>VALUE>Value>Name>Name>Value>Name>Value<b>Panasonic Aluminium Electrolytic Capacitor VS-Serie Package G</b>>NAME>VALUE<b>Panasonic Aluminium Electrolytic Capacitor VS-Serie Package E</b>>NAME>VALUE<b>Panasonic Aluminium Electrolytic Capacitor VS-Serie Package E</b>>NAME>VALUE>NAME>VALUE>NAME>VALUE>Value>Name>Value>Name>NAME>VALUE>NAME>VALUEType J2 package for SMD supercap PRT-10317 (p# EEC-EN0F204J2)>NAME>VALUE<h3>EIA3528-KIT</h3>
<b>Warning:</b> This is the KIT version of this package. This package has longer pads to make hand soldering easier.<br>>NAME>VALUE<h3>EIA3216-KIT</h3>
<b>Warning:</b> This is the KIT version of this package. This package has longer pads to make hand soldering easier.<br>>NAME>VALUE>NAME>VALUE<b>Capacitor Polarized</b>
These are standard SMD and PTH capacitors. Normally 10uF, 47uF, and 100uF in electrolytic and tantalum varieties. Always verify the external diameter of the through hole cap, it varies with capacity, voltage, and manufacturer. The EIA devices should be standard.<h3>SparkFun Electronics' preferred foot prints</h3>
In this library you'll find connectors and sockets- basically anything that can be plugged into or onto.<br><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br><br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.>NAME>VALUEDecoupling Capacitors
Must be as close as possible to each Vdd / Vss couple.
Since Version 6.2.2 text objects can contain more than one line,
which will not be processed correctly with this version.