<b>Thyristors, Triacs, Trigger Diodes</b><p>
<author>Created by librarian@cadsoft.de</author>
<b>SOT 82</b> vertical (Cathode; Anode; Gate)
>NAME
>VALUE
SOT 82 vertical (Cathode; Anode; Gate)
>NAME
>VALUE
<b>THYRISTOR</b>
<b>RESISTOR</b><p>
chip
>NAME
>VALUE
<b>RESISTOR</b><p>
chip
>NAME
>VALUE
<b>RESISTOR</b><p>
chip
>NAME
>VALUE
<b>RESISTOR</b><p>
chip, wave soldering
>NAME
>VALUE
<b>RESISTOR</b><p>
chip
>NAME
>VALUE
<b>RESISTOR</b><p>
chip
>NAME
>VALUE
<b>RESISTOR</b><p>
chip, wave soldering
>NAME
>VALUE
<b>RESISTOR</b><p>
chip
>NAME
>VALUE
<b>RESISTOR</b><p>
chip, wave soldering
>NAME
>VALUE
<b>RESISTOR</b><p>
chip
>NAME
>VALUE
<b>RESISTOR</b><p>
chip, wave soldering
>NAME
>VALUE
<b>RESISTOR</b><p>
chip
>NAME
>VALUE
<b>RESISTOR</b><p>
chip, wave soldering
>NAME
>VALUE
<b>RESISTOR</b><p>
chip
>NAME
>VALUE
<b>RESISTOR</b><p>
chip, wave soldering
>NAME
>VALUE
<b>RESISTOR</b><p>
chip
>NAME
>VALUE
<b>RESISTOR</b><p>
chip, wave soldering
>NAME
>VALUE
<b>RESISTOR</b><p>
chip
>NAME
>VALUE
<b>RESISTOR</b><p>
chip, wave soldering
>NAME
>VALUE
<b>RESISTOR</b><p>
chip
>NAME
>VALUE
<b>RESISTOR</b><p>
chip, wave soldering
>NAME
>VALUE
<b>RESISTOR</b><p>
chip
>NAME
>VALUE
<b>RESISTOR</b><p>
chip, wave soldering
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.10 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.25 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.12 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.10 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.25 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.25 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.12 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.25 W
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0204, grid 5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0204, grid 7.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 10 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 12 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 15mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 2.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 7.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0309, grid 10mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0309, grid 12.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0411, grid 12.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0411, grid 15 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0411, grid 3.81 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0414, grid 15 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0414, grid 5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0617, grid 17.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0617, grid 22.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0617, grid 5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0922, grid 22.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0613, grid 5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0613, grid 15 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0817, grid 22.5 mm
>NAME
>VALUE
0817
<b>RESISTOR</b><p>
type 0817, grid 6.35 mm
>NAME
>VALUE
0817
<b>RESISTOR</b><p>
type V234, grid 12.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type V235, grid 17.78 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type V526-0, grid 2.5 mm
>NAME
>VALUE
<b>Mini MELF 0102 Axial</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0922, grid 7.5 mm
>NAME
>VALUE
0922
<b>CECC Size RC2211</b> Reflow Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>CECC Size RC2211</b> Wave Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>CECC Size RC3715</b> Reflow Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>CECC Size RC3715</b> Wave Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>CECC Size RC6123</b> Reflow Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>CECC Size RC6123</b> Wave Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>RESISTOR</b><p>
type RDH, grid 15 mm
>NAME
>VALUE
RDH
<b>RESISTOR</b><p>
type 0204, grid 2.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0309, grid 2.5 mm
>NAME
>VALUE
>NAME
>VALUE
>NAME
>VALUE
>NAME
>VALUE
<b>RESISTOR</b><p>
chip
<b>RESISTOR</b><p>
chip
<b>RESISTOR</b><p>
chip
<b>RESISTOR</b><p>
chip, wave soldering
<b>RESISTOR</b><p>
chip
<b>RESISTOR</b><p>
chip
<b>RESISTOR</b><p>
chip, wave soldering
<b>RESISTOR</b><p>
chip
<b>RESISTOR</b><p>
chip, wave soldering
<b>RESISTOR</b><p>
chip
<b>RESISTOR</b><p>
chip, wave soldering
<b>RESISTOR</b><p>
chip
<b>RESISTOR</b><p>
chip, wave soldering
<b>RESISTOR</b><p>
chip
<b>RESISTOR</b><p>
chip, wave soldering
<b>RESISTOR</b><p>
chip
<b>RESISTOR</b><p>
chip, wave soldering
<b>RESISTOR</b><p>
chip
<b>RESISTOR</b><p>
chip, wave soldering
<b>RESISTOR</b><p>
chip
<b>RESISTOR</b><p>
chip, wave soldering
<b>RESISTOR</b><p>
chip
<b>RESISTOR</b><p>
chip, wave soldering
<b>RESISTOR</b><p>
MELF 0.10 W
<b>RESISTOR</b><p>
MELF 0.25 W
<b>RESISTOR</b><p>
MELF 0.12 W
<b>RESISTOR</b><p>
MELF 0.10 W
<b>RESISTOR</b><p>
MELF 0.25 W
<b>RESISTOR</b><p>
MELF 0.25 W
<b>RESISTOR</b><p>
MELF 0.12 W
<b>RESISTOR</b><p>
MELF 0.25 W
<b>RESISTOR</b><p>
type 0204, grid 5 mm
<b>RESISTOR</b><p>
type 0204, grid 7.5 mm
<b>RESISTOR</b><p>
type 0207, grid 10 mm
<b>RESISTOR</b><p>
type 0207, grid 12 mm
<b>RESISTOR</b><p>
type 0207, grid 15mm
<b>RESISTOR</b><p>
type 0207, grid 2.5 mm
<b>RESISTOR</b><p>
type 0207, grid 5 mm
<b>RESISTOR</b><p>
type 0207, grid 7.5 mm
<b>RESISTOR</b><p>
type 0309, grid 10mm
<b>RESISTOR</b><p>
type 0309, grid 12.5 mm
<b>RESISTOR</b><p>
type 0411, grid 12.5 mm
<b>RESISTOR</b><p>
type 0411, grid 15 mm
<b>RESISTOR</b><p>
type 0411, grid 3.81 mm
<b>RESISTOR</b><p>
type 0414, grid 15 mm
<b>RESISTOR</b><p>
type 0414, grid 5 mm
<b>RESISTOR</b><p>
type 0617, grid 17.5 mm
<b>RESISTOR</b><p>
type 0617, grid 22.5 mm
<b>RESISTOR</b><p>
type 0617, grid 5 mm
<b>RESISTOR</b><p>
type 0922, grid 22.5 mm
<b>RESISTOR</b><p>
type 0613, grid 5 mm
<b>RESISTOR</b><p>
type 0613, grid 15 mm
<b>RESISTOR</b><p>
type 0817, grid 22.5 mm
<b>RESISTOR</b><p>
type 0817, grid 6.35 mm
<b>RESISTOR</b><p>
type V234, grid 12.5 mm
<b>RESISTOR</b><p>
type V235, grid 17.78 mm
<b>RESISTOR</b><p>
type V526-0, grid 2.5 mm
<b>Mini MELF 0102 Axial</b>
<b>RESISTOR</b><p>
type 0922, grid 7.5 mm
<b>CECC Size RC2211</b> Reflow Soldering<p>
source Beyschlag
<b>CECC Size RC2211</b> Wave Soldering<p>
source Beyschlag
<b>CECC Size RC3715</b> Reflow Soldering<p>
source Beyschlag
<b>CECC Size RC3715</b> Wave Soldering<p>
source Beyschlag
<b>CECC Size RC6123</b> Reflow Soldering<p>
source Beyschlag
<b>CECC Size RC6123</b> Wave Soldering<p>
source Beyschlag
<b>RESISTOR</b><p>
type RDH, grid 15 mm
<b>RESISTOR</b><p>
type 0204, grid 2.5 mm
<b>RESISTOR</b><p>
type 0309, grid 2.5 mm
>NAME
>VALUE
<B>RESISTOR</B>, American symbol
<b>Opto Couplers</b><p>
Siemens, Hewlett-Packard, Texas Instuments, Sharp, Motorola<p>
<author>Created by librarian@cadsoft.de</author>
<b>Dual In Line Package</b>
>VALUE
>NAME
Dual In Line Package
>NAME
>VALUE
<b>SHARP OPTO COUPLER</b>
<h3>SparkFun Connectors</h3>
This library contains electrically-functional connectors.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.
<h3>Plated Through Hole</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>NAME
>VALUE
<h3>Molex 2-Pin Plated Through-Hole</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>NAME
>VALUE
<h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>NAME
>VALUE
<h3>JST-Right Angle Male Header SMT</h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 2mm</li>
</ul></p>
<p><a href=”http://www.4uconnector.com/online/object/4udrawing/20404.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
<li>JST_2MM_MALE</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.15"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>NAME
>VALUE
<h3>JST-Vertical Male Header SMT </h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 2mm</li>
</ul></p>
<p><a href=”http://www.4uconnector.com/online/object/4udrawing/20404.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>Name
>Value
<h3>Screw Terminal 5mm Pitch -2 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 5mm/197mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole - Locking Footprint</h3>
Holes are staggered by 0.005" from center to hold pins while soldering.
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>NAME
>VALUE
<h3>Molex 2-Pin Plated Through-Hole Locking Footprint</h3>
Holes are offset from center by 0.005" to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole - Long Pads with Locking Footprint</h3>
Pins are staggered by 0.005" from center to hold pins in place while soldering.
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>NAME
>VALUE
<h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH Locking</h3>
Holes are offset from center 0.005" to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole - Long Pads without Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole - No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>NAME
>VALUE
<h3>JST 2 Pin Right Angle Plated Through Hole</h3>
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>Name
>Value
+
-
<h3>Plated Through Hole - 0.1" holes</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.2"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>NAME
>VALUE
<h3>Pogo Pins Connector - No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>NAME
>VALUE
<h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>NAME
>VALUE
<h3>JST 2 Pin Right Angle Plated Through Hole- No Silk</h3>
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
<br> No silk outline of connector.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>Name
>Value
+
-
<h3>JST 2 Pin Right Angle Plated Through Hole - KIT</h3>
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
<br> This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad.
<br> This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>Name
>Value
+
-
<h3>Spring Terminal- PCB Mount 2 Pin PTH</h3>
tDocu marks the spring arms
<p>Specifications:
<ul><li>Pin count: 4</li>
<li>Pin pitch: 0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/SpringTerminal.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
<h3>2 Pin Screw Terminal - 2.54mm</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>
>NAME
>VALUE
2 pin poke-home connector
part number 2062-2P from STA
>NAME
>VALUE
>NAME
>VALUE
<h3>Plated Through Hole - 3 Pin</h3>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>PTH - 3 Pin Vertical Molex Polarized Header</h3>
<p><b>Datasheet referenced for footprint:</b><a href="http://www.4uconnector.com/online/object/4udrawing/01932.pdf"> 4UCONN part # 01932 </a></p>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>Screw Terminal 3.5mm Pitch -3 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 3</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole - 3 Pin Locking Footprint</h3>
Pins are staggered 0.005" off center to lock pins while soldering.
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole - 3 Pin Long Pad w/ Locking Footprint</h3>
Holes are offset 0.005" from center to lock pins in place while soldering.
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>PTH - 3 Pin Vertical Molex Polarized Header</h3>
Pins are offset 0.005" from center to lock pins in place during soldering.
<p><b>Datasheet referenced for footprint:</b><a href="http://www.4uconnector.com/online/object/4udrawing/01932.pdf"> 4UCONN part # 01932 </a></p>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>Screw Terminal 3.5mm Pitch -3 Pin PTH Locking</h3>
Holes are offset 0.007" from center to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count: 3</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole - 3 Pin No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole - 3 Pin Long Pads</h3>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>JST 3 Pin Right Angle Plated Through Hole</h3>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
+
-
S
>NAME
>VALUE
<h3>Pogo Pins - 3 Pin</h3>
<p>Specifications:
<ul><li>Pin count:3</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>Screw Terminal 5mm Pitch -3 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 3</li>
<li>Pin pitch: 5mm/197mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole - 3 Pin Locking Footprint w/out Silk Outline</h3>
Holes are offset from center 0.005" to lock pins in place while soldering.
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>JST 3 Pin Right Angle SMT</h3>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>Plated Through Hole - 3 Pin SMD</h3>
<p>Specifications:
<ul><li>Pin count:3</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>SMD - 3 Pin Right Angle Female Header</h3>
Silk outline of pin location
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>SMD- 3 Pin Right Angle Male Headers</h3>
No silk outline, but tDocu layer shows pin location.
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>SMD - 3 Pin Right Angle Male Header w/ Alignment Posts</h3>
<p><b>Datasheet referenced for footprint:</b><a href="http://www.4uconnector.com/online/object/4udrawing/11026.pdf"> 4UCONN part # 11026 </a></p>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
<h3>JST 3 Pin Vertical Plated Through Hole</h3>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
+
-
S
>NAME
>VALUE
<h3>SMD - 3 Pin Right Angle Male Header w/ Alignment Posts</h3>
<p><b>Datasheet referenced for footprint:</b><a href="http://www.4uconnector.com/online/object/4udrawing/11026.pdf"> 4UCONN part # 11026 </a></p>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
<h3>JST 3 Pin Right Angle Plated Through Hole – NO SILK</h3>
<p>No silkscreen outline. tDoc layer (51) indicates connector footprint.</p>
<p>Specifications:
<ul><li>Pin count:3</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
+
-
S
>NAME
>VALUE
<h3>Screw Terminal 3.5mm Pitch -3 Pin PTH – NO SILK</h3>
<p>No silkscreen outline. tDoc layer (51) indicates connector footprint.</p>
<p>Specifications:
<ul><li>Pin count: 3</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_03</li>
</ul></p>
>NAME
>VALUE
Plated Through Hole
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
Molex 2-Pin Plated Through-Hole
Specifications:
Pin count:2
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_02
Screw Terminal 3.5mm Pitch - 2 Pin PTH
Specifications:
Pin count: 2
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_02
JST-Right Angle Male Header SMT
Specifications:
Pin count: 2
Pin pitch: 2mm
Datasheet referenced for footprint
Example device(s):
CONN_02
JST_2MM_MALE
Plated Through Hole
Specifications:
Pin count:2
Pin pitch:0.15"
Example device(s):
CONN_02
JST-Vertical Male Header SMT
Specifications:
Pin count: 2
Pin pitch: 2mm
Datasheet referenced for footprint
Example device(s):
CONN_02
Screw Terminal 5mm Pitch -2 Pin PTH
Specifications:
Pin count: 2
Pin pitch: 5mm/197mil
Datasheet referenced for footprint
Example device(s):
CONN_02
Plated Through Hole - Locking Footprint
Holes are staggered by 0.005" from center to hold pins while soldering.
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
Molex 2-Pin Plated Through-Hole Locking Footprint
Holes are offset from center by 0.005" to hold pins in place during soldering.
Specifications:
Pin count:2
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_02
Plated Through Hole - Long Pads with Locking Footprint
Pins are staggered by 0.005" from center to hold pins in place while soldering.
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
Screw Terminal 3.5mm Pitch - 2 Pin PTH Locking
Holes are offset from center 0.005" to hold pins in place during soldering.
Specifications:
Pin count: 2
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_02
Plated Through Hole - Long Pads without Silk Outline
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
Plated Through Hole - No Silk Outline
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
JST 2 Pin Right Angle Plated Through Hole
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
Specifications:
Pin count: 2
Pin pitch:2mm
Datasheet referenced for footprint
Example device(s):
CONN_02
Plated Through Hole - 0.1" holes
Specifications:
Pin count:2
Pin pitch:0.2"
Example device(s):
CONN_02
Pogo Pins Connector - No Silk Outline
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
Screw Terminal 3.5mm Pitch - 2 Pin PTH No Silk Outline
Specifications:
Pin count: 2
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_02
JST 2 Pin Right Angle Plated Through Hole- No Silk
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
No silk outline of connector.
Specifications:
Pin count: 2
Pin pitch:2mm
Datasheet referenced for footprint
Example device(s):
CONN_02
JST 2 Pin Right Angle Plated Through Hole - KIT
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad.
This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.
Specifications:
Pin count: 2
Pin pitch:2mm
Datasheet referenced for footprint
Example device(s):
CONN_02
Spring Terminal- PCB Mount 2 Pin PTH
tDocu marks the spring arms
Specifications:
Pin count: 4
Pin pitch: 0.1"
Datasheet referenced for footprint
Example device(s):
CONN_02
2 Pin Screw Terminal - 2.54mm
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
2 pin poke-home connector
part number 2062-2P from STA
Plated Through Hole - 3 Pin
Specifications:
Pin count:3
Pin pitch:0.1"
Example device(s):
CONN_03
PTH - 3 Pin Vertical Molex Polarized Header
Datasheet referenced for footprint: 4UCONN part # 01932
Specifications:
Pin count:3
Pin pitch:0.1"
Example device(s):
CONN_03
Screw Terminal 3.5mm Pitch -3 Pin PTH
Specifications:
Pin count: 3
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_03
Plated Through Hole - 3 Pin Locking Footprint
Pins are staggered 0.005" off center to lock pins while soldering.
Specifications:
Pin count:3
Pin pitch:0.1"
Example device(s):
CONN_03
Plated Through Hole - 3 Pin Long Pad w/ Locking Footprint
Holes are offset 0.005" from center to lock pins in place while soldering.
Specifications:
Pin count:3
Pin pitch:0.1"
Example device(s):
CONN_03
PTH - 3 Pin Vertical Molex Polarized Header
Pins are offset 0.005" from center to lock pins in place during soldering.
Datasheet referenced for footprint: 4UCONN part # 01932
Specifications:
Pin count:3
Pin pitch:0.1"
Example device(s):
CONN_03
Screw Terminal 3.5mm Pitch -3 Pin PTH Locking
Holes are offset 0.007" from center to hold pins in place during soldering.
Specifications:
Pin count: 3
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_03
Plated Through Hole - 3 Pin No Silk Outline
Specifications:
Pin count:3
Pin pitch:0.1"
Example device(s):
CONN_03
Plated Through Hole - 3 Pin Long Pads
Specifications:
Pin count:3
Pin pitch:0.1"
Example device(s):
CONN_03
JST 3 Pin Right Angle Plated Through Hole
Specifications:
Pin count:3
Pin pitch:2mm
Datasheet referenced for footprint
Example device(s):
CONN_03
Pogo Pins - 3 Pin
Specifications:
Pin count:3
Example device(s):
CONN_03
Screw Terminal 5mm Pitch -3 Pin PTH
Specifications:
Pin count: 3
Pin pitch: 5mm/197mil
Datasheet referenced for footprint
Example device(s):
CONN_03
Plated Through Hole - 3 Pin Locking Footprint w/out Silk Outline
Holes are offset from center 0.005" to lock pins in place while soldering.
Specifications:
Pin count:3
Pin pitch:0.1"
Example device(s):
CONN_03
JST 3 Pin Right Angle SMT
Specifications:
Pin count:3
Pin pitch:2mm
Example device(s):
CONN_03
Plated Through Hole - 3 Pin SMD
Specifications:
Pin count:3
Example device(s):
CONN_03
SMD - 3 Pin Right Angle Female Header
Silk outline of pin location
Specifications:
Pin count:3
Pin pitch:0.1"
Example device(s):
CONN_03
SMD- 3 Pin Right Angle Male Headers
No silk outline, but tDocu layer shows pin location.
Specifications:
Pin count:3
Pin pitch:0.1"
Example device(s):
CONN_03
SMD - 3 Pin Right Angle Male Header w/ Alignment Posts
Datasheet referenced for footprint: 4UCONN part # 11026
Specifications:
Pin count:3
Pin pitch:0.1"
Example device(s):
CONN_03
JST 3 Pin Vertical Plated Through Hole
Specifications:
Pin count:3
Pin pitch:2mm
Datasheet referenced for footprint
Example device(s):
CONN_03
SMD - 3 Pin Right Angle Male Header w/ Alignment Posts
Datasheet referenced for footprint: 4UCONN part # 11026
Specifications:
Pin count:3
Pin pitch:0.1"
Example device(s):
CONN_03
JST 3 Pin Right Angle Plated Through Hole – NO SILK
No silkscreen outline. tDoc layer (51) indicates connector footprint.
Specifications:
Pin count:3
Pin pitch:2mm
Datasheet referenced for footprint
Example device(s):
CONN_03
Screw Terminal 3.5mm Pitch -3 Pin PTH – NO SILK
No silkscreen outline. tDoc layer (51) indicates connector footprint.
Specifications:
Pin count: 3
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_03
<h3>2 Pin Connection</h3>
>VALUE
>NAME
<h3>3 Pin Connection</h3>
>VALUE
>NAME
<h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
</ul>
<p></p>
<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b>
<ul>
<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li>
</ul>
<p></p>
<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b>
<ul>
<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li>
<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li>
<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li>
<p></p>
</ul>
<p></p>
<b>Special notes:</b>
Molex polarized connector foot print use with: PRT-08233 with associated crimp pins and housings.<br><br>
2.54_SCREWTERM for use with PRT-10571.<br><br>
3.5mm Screw Terminal footprints for PRT-08084<br><br>
5mm Screw Terminal footprints for use with PRT-08432
<h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
<li><a href="https://www.sparkfun.com/products/13875"> Stackable Header - 3 Pin (Female, 0.1")</a> (PRT-13875)</li>
</ul>
<p></p>
<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b>
<ul>
<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li>
</ul>
<p></p>
<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b>
<ul>
<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li>
<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li>
<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li>
<p></p>
</ul>
<p></p>
<b>Special notes:</b>
<p> </p>
<p> </p> Molex polarized connector foot print use with SKU : PRT-08232 with associated crimp pins and housings.
<b>Voltage Regulators</b><p>
<author>Created by librarian@cadsoft.de</author>
<b>VOLTAGE REGULATOR</b>
>NAME
>VALUE
-
I
O
<b>VOLTAGE REGULATOR</b>
>NAME
>VALUE
O
I
A
VOLTAGE REGULATOR
VOLTAGE REGULATOR
>NAME
>VALUE
GND
IN
OUT
>NAME
>VALUE
ADJ
IN
OUT
<b>VOLTAGE REGULATOR</b>
<b>VOLTAGE REGULATOR</b>
GND Symbol
GND Supply
<h3>SparkFun Power Symbols</h3>
This library contains power, ground, and voltage-supply symbols.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.
<h3>VCC Voltage Supply</h3>
>VALUE
<h3>VCC Voltage Supply</h3>
<p>Positive voltage supply (traditionally for a BJT device, C=collector).</p>
<h3>SparkFun Capacitors</h3>
This library contains capacitors.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.
EIA 7343 tantalum capacitor
>Name
>Value
2.5 mm spaced PTHs with 6.5 mm diameter outline
>Value
>Name
Some old package in our library
>NAME
>VALUE
<b>Panasonic Aluminium Electrolytic Capacitor VS-Serie Package E</b>
>NAME
>VALUE
EIA 7343 tantalum capacitor
2.5 mm spaced PTHs with 6.5 mm diameter outline
Some old package in our library
Panasonic Aluminium Electrolytic Capacitor VS-Serie Package E
>NAME
>VALUE
<h3>100µF polarized capacitors</h3>
<p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p>
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.
Since Version 8.3, EAGLE supports the association of 3D packages
with devices in libraries, schematics, and board files. Those 3D
packages will not be understood (or retained) with this version.