/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ /** * \file * \brief FAT file structures */ /** * Arduino SdFat Library * Copyright (C) 2009 by William Greiman * * This file is part of the Arduino Sd2Card Library */ #ifndef SDFATSTRUCTS_H #define SDFATSTRUCTS_H #define PACKED __attribute__((__packed__)) /** * mostly from Microsoft document fatgen103.doc * http://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx */ uint8_t const BOOTSIG0 = 0x55, // Value for byte 510 of boot block or MBR BOOTSIG1 = 0xAA, // Value for byte 511 of boot block or MBR EXTENDED_BOOT_SIG = 0x29; // Value for bootSignature field int FAT/FAT32 boot sector /** * \struct partitionTable * \brief MBR partition table entry * * A partition table entry for a MBR formatted storage device. * The MBR partition table has four entries. */ struct partitionTable { /** * Boot Indicator . Indicates whether the volume is the active * partition. Legal values include: 0x00. Do not use for booting. * 0x80 Active partition. */ uint8_t boot; /** * Head part of Cylinder-head-sector address of the first block in * the partition. Legal values are 0-255. Only used in old PC BIOS. */ uint8_t beginHead; /** * Sector part of Cylinder-head-sector address of the first block in * the partition. Legal values are 1-63. Only used in old PC BIOS. */ unsigned beginSector : 6; /** High bits cylinder for first block in partition. */ unsigned beginCylinderHigh : 2; /** * Combine beginCylinderLow with beginCylinderHigh. Legal values * are 0-1023. Only used in old PC BIOS. */ uint8_t beginCylinderLow; /** * Partition type. See defines that begin with PART_TYPE_ for * some Microsoft partition types. */ uint8_t type; /** * head part of cylinder-head-sector address of the last sector in the * partition. Legal values are 0-255. Only used in old PC BIOS. */ uint8_t endHead; /** * Sector part of cylinder-head-sector address of the last sector in * the partition. Legal values are 1-63. Only used in old PC BIOS. */ unsigned endSector : 6; /** High bits of end cylinder */ unsigned endCylinderHigh : 2; /** * Combine endCylinderLow with endCylinderHigh. Legal values * are 0-1023. Only used in old PC BIOS. */ uint8_t endCylinderLow; uint32_t firstSector; // Logical block address of the first block in the partition. uint32_t totalSectors; // Length of the partition, in blocks. } PACKED; typedef struct partitionTable part_t; // Type name for partitionTable /** * \struct masterBootRecord * * \brief Master Boot Record * * The first block of a storage device that is formatted with a MBR. */ struct masterBootRecord { uint8_t codeArea[440]; // Code Area for master boot program. uint32_t diskSignature; // Optional Windows NT disk signature. May contain boot code. uint16_t usuallyZero; // Usually zero but may be more boot code. part_t part[4]; // Partition tables. uint8_t mbrSig0; // First MBR signature byte. Must be 0x55 uint8_t mbrSig1; // Second MBR signature byte. Must be 0xAA } PACKED; /** Type name for masterBootRecord */ typedef struct masterBootRecord mbr_t; /** * \struct fat_boot * * \brief Boot sector for a FAT12/FAT16 volume. * */ struct fat_boot { /** * The first three bytes of the boot sector must be valid, * executable x 86-based CPU instructions. This includes a * jump instruction that skips the next nonexecutable bytes. */ uint8_t jump[3]; /** * This is typically a string of characters that identifies * the operating system that formatted the volume. */ char oemId[8]; /** * The size of a hardware sector. Valid decimal values for this * field are 512, 1024, 2048, and 4096. For most disks used in * the United States, the value of this field is 512. */ uint16_t bytesPerSector; /** * Number of sectors per allocation unit. This value must be a * power of 2 that is greater than 0. The legal values are * 1, 2, 4, 8, 16, 32, 64, and 128. 128 should be avoided. */ uint8_t sectorsPerCluster; /** * The number of sectors preceding the start of the first FAT, * including the boot sector. The value of this field is always 1. */ uint16_t reservedSectorCount; /** * The number of copies of the FAT on the volume. * The value of this field is always 2. */ uint8_t fatCount; /** * For FAT12 and FAT16 volumes, this field contains the count of * 32-byte directory entries in the root directory. For FAT32 volumes, * this field must be set to 0. For FAT12 and FAT16 volumes, this * value should always specify a count that when multiplied by 32 * results in a multiple of bytesPerSector. FAT16 volumes should * use the value 512. */ uint16_t rootDirEntryCount; /** * This field is the old 16-bit total count of sectors on the volume. * This count includes the count of all sectors in all four regions * of the volume. This field can be 0; if it is 0, then totalSectors32 * must be nonzero. For FAT32 volumes, this field must be 0. For * FAT12 and FAT16 volumes, this field contains the sector count, and * totalSectors32 is 0 if the total sector count fits * (is less than 0x10000). */ uint16_t totalSectors16; /** * This dates back to the old MS-DOS 1.x media determination and is * no longer usually used for anything. 0xF8 is the standard value * for fixed (nonremovable) media. For removable media, 0xF0 is * frequently used. Legal values are 0xF0 or 0xF8-0xFF. */ uint8_t mediaType; /** * Count of sectors occupied by one FAT on FAT12/FAT16 volumes. * On FAT32 volumes this field must be 0, and sectorsPerFat32 * contains the FAT size count. */ uint16_t sectorsPerFat16; uint16_t sectorsPerTrack; // Sectors per track for interrupt 0x13. Not used otherwise. uint16_t headCount; // Number of heads for interrupt 0x13. Not used otherwise. /** * Count of hidden sectors preceding the partition that contains this * FAT volume. This field is generally only relevant for media * visible on interrupt 0x13. */ uint32_t hidddenSectors; /** * This field is the new 32-bit total count of sectors on the volume. * This count includes the count of all sectors in all four regions * of the volume. This field can be 0; if it is 0, then * totalSectors16 must be nonzero. */ uint32_t totalSectors32; /** * Related to the BIOS physical drive number. Floppy drives are * identified as 0x00 and physical hard disks are identified as * 0x80, regardless of the number of physical disk drives. * Typically, this value is set prior to issuing an INT 13h BIOS * call to specify the device to access. The value is only * relevant if the device is a boot device. */ uint8_t driveNumber; uint8_t reserved1; // used by Windows NT - should be zero for FAT uint8_t bootSignature; // 0x29 if next three fields are valid /** * A random serial number created when formatting a disk, * which helps to distinguish between disks. * Usually generated by combining date and time. */ uint32_t volumeSerialNumber; /** * A field once used to store the volume label. The volume label * is now stored as a special file in the root directory. */ char volumeLabel[11]; /** * A field with a value of either FAT, FAT12 or FAT16, * depending on the disk format. */ char fileSystemType[8]; uint8_t bootCode[448]; // X86 boot code uint8_t bootSectorSig0; // must be 0x55 uint8_t bootSectorSig1; // must be 0xAA } PACKED; typedef struct fat_boot fat_boot_t; // Type name for FAT Boot Sector /** * \struct fat32_boot * * \brief Boot sector for a FAT32 volume. */ struct fat32_boot { /** * The first three bytes of the boot sector must be valid, * executable x 86-based CPU instructions. This includes a * jump instruction that skips the next nonexecutable bytes. */ uint8_t jump[3]; /** * This is typically a string of characters that identifies * the operating system that formatted the volume. */ char oemId[8]; /** * The size of a hardware sector. Valid decimal values for this * field are 512, 1024, 2048, and 4096. For most disks used in * the United States, the value of this field is 512. */ uint16_t bytesPerSector; /** * Number of sectors per allocation unit. This value must be a * power of 2 that is greater than 0. The legal values are * 1, 2, 4, 8, 16, 32, 64, and 128. 128 should be avoided. */ uint8_t sectorsPerCluster; /** * The number of sectors preceding the start of the first FAT, * including the boot sector. Must not be zero */ uint16_t reservedSectorCount; /** * The number of copies of the FAT on the volume. * The value of this field is always 2. */ uint8_t fatCount; /** * FAT12/FAT16 only. For FAT32 volumes, this field must be set to 0. */ uint16_t rootDirEntryCount; /** * For FAT32 volumes, this field must be 0. */ uint16_t totalSectors16; /** * This dates back to the old MS-DOS 1.x media determination and is * no longer usually used for anything. 0xF8 is the standard value * for fixed (nonremovable) media. For removable media, 0xF0 is * frequently used. Legal values are 0xF0 or 0xF8-0xFF. */ uint8_t mediaType; /** * On FAT32 volumes this field must be 0, and sectorsPerFat32 * contains the FAT size count. */ uint16_t sectorsPerFat16; uint16_t sectorsPerTrack; // Sectors per track for interrupt 0x13. Not used otherwise. uint16_t headCount; // Number of heads for interrupt 0x13. Not used otherwise. /** * Count of hidden sectors preceding the partition that contains this * FAT volume. This field is generally only relevant for media * visible on interrupt 0x13. */ uint32_t hidddenSectors; /** * Contains the total number of sectors in the FAT32 volume. */ uint32_t totalSectors32; /** * Count of sectors occupied by one FAT on FAT32 volumes. */ uint32_t sectorsPerFat32; /** * This field is only defined for FAT32 media and does not exist on * FAT12 and FAT16 media. * Bits 0-3 -- Zero-based number of active FAT. * Only valid if mirroring is disabled. * Bits 4-6 -- Reserved. * Bit 7 -- 0 means the FAT is mirrored at runtime into all FATs. * -- 1 means only one FAT is active; it is the one referenced * in bits 0-3. * Bits 8-15 -- Reserved. */ uint16_t fat32Flags; /** * FAT32 version. High byte is major revision number. * Low byte is minor revision number. Only 0.0 define. */ uint16_t fat32Version; /** * Cluster number of the first cluster of the root directory for FAT32. * This usually 2 but not required to be 2. */ uint32_t fat32RootCluster; /** * Sector number of FSINFO structure in the reserved area of the * FAT32 volume. Usually 1. */ uint16_t fat32FSInfo; /** * If nonzero, indicates the sector number in the reserved area * of the volume of a copy of the boot record. Usually 6. * No value other than 6 is recommended. */ uint16_t fat32BackBootBlock; /** * Reserved for future expansion. Code that formats FAT32 volumes * should always set all of the bytes of this field to 0. */ uint8_t fat32Reserved[12]; /** * Related to the BIOS physical drive number. Floppy drives are * identified as 0x00 and physical hard disks are identified as * 0x80, regardless of the number of physical disk drives. * Typically, this value is set prior to issuing an INT 13h BIOS * call to specify the device to access. The value is only * relevant if the device is a boot device. */ uint8_t driveNumber; uint8_t reserved1; // Used by Windows NT - should be zero for FAT uint8_t bootSignature; // 0x29 if next three fields are valid /** * A random serial number created when formatting a disk, * which helps to distinguish between disks. * Usually generated by combining date and time. */ uint32_t volumeSerialNumber; /** * A field once used to store the volume label. The volume label * is now stored as a special file in the root directory. */ char volumeLabel[11]; /** * A text field with a value of FAT32. */ char fileSystemType[8]; uint8_t bootCode[420]; // X86 boot code uint8_t bootSectorSig0; // must be 0x55 uint8_t bootSectorSig1; // must be 0xAA } PACKED; typedef struct fat32_boot fat32_boot_t; // Type name for FAT32 Boot Sector uint32_t const FSINFO_LEAD_SIG = 0x41615252, // 'AaRR' Lead signature for a FSINFO sector FSINFO_STRUCT_SIG = 0x61417272; // 'aArr' Struct signature for a FSINFO sector /** * \struct fat32_fsinfo * * \brief FSINFO sector for a FAT32 volume. * */ struct fat32_fsinfo { uint32_t leadSignature; // must be 0x52, 0x52, 0x61, 0x41 'RRaA' uint8_t reserved1[480]; // must be zero uint32_t structSignature; // must be 0x72, 0x72, 0x41, 0x61 'rrAa' /** * Contains the last known free cluster count on the volume. * If the value is 0xFFFFFFFF, then the free count is unknown * and must be computed. Any other value can be used, but is * not necessarily correct. It should be range checked at least * to make sure it is <= volume cluster count. */ uint32_t freeCount; /** * This is a hint for the FAT driver. It indicates the cluster * number at which the driver should start looking for free clusters. * If the value is 0xFFFFFFFF, then there is no hint and the driver * should start looking at cluster 2. */ uint32_t nextFree; uint8_t reserved2[12]; // must be zero uint8_t tailSignature[4]; // must be 0x00, 0x00, 0x55, 0xAA } PACKED; typedef struct fat32_fsinfo fat32_fsinfo_t; // Type name for FAT32 FSINFO Sector // End Of Chain values for FAT entries uint16_t const FAT12EOC = 0xFFF, // FAT12 end of chain value used by Microsoft. FAT12EOC_MIN = 0xFF8, // Minimum value for FAT12 EOC. Use to test for EOC. FAT16EOC = 0xFFFF, // FAT16 end of chain value used by Microsoft. FAT16EOC_MIN = 0xFFF8; // Minimum value for FAT16 EOC. Use to test for EOC. uint32_t const FAT32EOC = 0x0FFFFFFF, // FAT32 end of chain value used by Microsoft. FAT32EOC_MIN = 0x0FFFFFF8, // Minimum value for FAT32 EOC. Use to test for EOC. FAT32MASK = 0x0FFFFFFF; // Mask a for FAT32 entry. Entries are 28 bits. /** * \struct directoryEntry * \brief FAT short directory entry * * Short means short 8.3 name, not the entry size. * * Date Format. A FAT directory entry date stamp is a 16-bit field that is * basically a date relative to the MS-DOS epoch of 01/01/1980. Here is the * format (bit 0 is the LSB of the 16-bit word, bit 15 is the MSB of the * 16-bit word): * * Bits 9-15: Count of years from 1980, valid value range 0-127 * inclusive (1980-2107). * * Bits 5-8: Month of year, 1 = January, valid value range 1-12 inclusive. * * Bits 0-4: Day of month, valid value range 1-31 inclusive. * * Time Format. A FAT directory entry time stamp is a 16-bit field that has * a granularity of 2 seconds. Here is the format (bit 0 is the LSB of the * 16-bit word, bit 15 is the MSB of the 16-bit word). * * Bits 11-15: Hours, valid value range 0-23 inclusive. * * Bits 5-10: Minutes, valid value range 0-59 inclusive. * * Bits 0-4: 2-second count, valid value range 0-29 inclusive (0 - 58 seconds). * * The valid time range is from Midnight 00:00:00 to 23:59:58. */ struct directoryEntry { /** * Short 8.3 name. * * The first eight bytes contain the file name with blank fill. * The last three bytes contain the file extension with blank fill. */ uint8_t name[11]; /** * Entry attributes. * * The upper two bits of the attribute byte are reserved and should * always be set to 0 when a file is created and never modified or * looked at after that. See defines that begin with DIR_ATT_. */ uint8_t attributes; /** * Reserved for use by Windows NT. Set value to 0 when a file is * created and never modify or look at it after that. */ uint8_t reservedNT; /** * The granularity of the seconds part of creationTime is 2 seconds * so this field is a count of tenths of a second and it's valid * value range is 0-199 inclusive. (WHG note - seems to be hundredths) */ uint8_t creationTimeTenths; uint16_t creationTime; // Time file was created. uint16_t creationDate; // Date file was created. /** * Last access date. Note that there is no last access time, only * a date. This is the date of last read or write. In the case of * a write, this should be set to the same date as lastWriteDate. */ uint16_t lastAccessDate; /** * High word of this entry's first cluster number (always 0 for a * FAT12 or FAT16 volume). */ uint16_t firstClusterHigh; uint16_t lastWriteTime; // Time of last write. File creation is considered a write. uint16_t lastWriteDate; // Date of last write. File creation is considered a write. uint16_t firstClusterLow; // Low word of this entry's first cluster number. uint32_t fileSize; // 32-bit unsigned holding this file's size in bytes. } PACKED; /** * \struct directoryVFATEntry * \brief VFAT long filename directory entry * * directoryVFATEntries are found in the same list as normal directoryEntry. * But have the attribute field set to DIR_ATT_LONG_NAME. * * Long filenames are saved in multiple directoryVFATEntries. * Each entry containing 13 UTF-16 characters. */ struct directoryVFATEntry { /** * Sequence number. Consists of 2 parts: * bit 6: indicates first long filename block for the next file * bit 0-4: the position of this long filename block (first block is 1) */ uint8_t sequenceNumber; uint16_t name1[5]; // First set of UTF-16 characters uint8_t attributes; // attributes (at the same location as in directoryEntry), always 0x0F uint8_t reservedNT; // Reserved for use by Windows NT. Always 0. uint8_t checksum; // Checksum of the short 8.3 filename, can be used to checked if the file system as modified by a not-long-filename aware implementation. uint16_t name2[6]; // Second set of UTF-16 characters uint16_t firstClusterLow; // firstClusterLow is always zero for longFilenames uint16_t name3[2]; // Third set of UTF-16 characters } PACKED; // Definitions for directory entries // typedef struct directoryEntry dir_t; // Type name for directoryEntry typedef struct directoryVFATEntry vfat_t; // Type name for directoryVFATEntry uint8_t const DIR_NAME_0xE5 = 0x05, // escape for name[0] = 0xE5 DIR_NAME_DELETED = 0xE5, // name[0] value for entry that is free after being "deleted" DIR_NAME_FREE = 0x00, // name[0] value for entry that is free and no allocated entries follow DIR_ATT_READ_ONLY = 0x01, // file is read-only DIR_ATT_HIDDEN = 0x02, // File should hidden in directory listings DIR_ATT_SYSTEM = 0x04, // Entry is for a system file DIR_ATT_VOLUME_ID = 0x08, // Directory entry contains the volume label DIR_ATT_DIRECTORY = 0x10, // Entry is for a directory DIR_ATT_ARCHIVE = 0x20, // Old DOS archive bit for backup support DIR_ATT_LONG_NAME = 0x0F, // Test value for long name entry. Test is (d->attributes & DIR_ATT_LONG_NAME_MASK) == DIR_ATT_LONG_NAME. DIR_ATT_LONG_NAME_MASK = 0x3F, // Test mask for long name entry DIR_ATT_DEFINED_BITS = 0x3F; // defined attribute bits /** * Directory entry is part of a long name * \param[in] dir Pointer to a directory entry. * * \return true if the entry is for part of a long name else false. */ static inline uint8_t DIR_IS_LONG_NAME(const dir_t* dir) { return (dir->attributes & DIR_ATT_LONG_NAME_MASK) == DIR_ATT_LONG_NAME; } /** Mask for file/subdirectory tests */ uint8_t const DIR_ATT_FILE_TYPE_MASK = (DIR_ATT_VOLUME_ID | DIR_ATT_DIRECTORY); /** * Directory entry is for a file * \param[in] dir Pointer to a directory entry. * * \return true if the entry is for a normal file else false. */ static inline uint8_t DIR_IS_FILE(const dir_t* dir) { return (dir->attributes & DIR_ATT_FILE_TYPE_MASK) == 0; } /** * Directory entry is for a subdirectory * \param[in] dir Pointer to a directory entry. * * \return true if the entry is for a subdirectory else false. */ static inline uint8_t DIR_IS_SUBDIR(const dir_t* dir) { return (dir->attributes & DIR_ATT_FILE_TYPE_MASK) == DIR_ATT_DIRECTORY; } /** * Directory entry is for a file or subdirectory * \param[in] dir Pointer to a directory entry. * * \return true if the entry is for a normal file or subdirectory else false. */ static inline uint8_t DIR_IS_FILE_OR_SUBDIR(const dir_t* dir) { return (dir->attributes & DIR_ATT_VOLUME_ID) == 0; } #endif // SDFATSTRUCTS_H