20-DIP, 2.54 mm (0.10 in) pitch, 8.20 mm (0.32 in) span, 26.00 X 6.40 X 4.00 mm body
<p>20-pin DIP package with 2.54 mm (0.10 in) pitch, 8.20 mm (0.32 in) span with body size 26.00 X 6.40 X 4.00 mm</p>>NAME>VALUE>NAME>VALUE20-DIP, 2.54 mm (0.10 in) pitch, 8.20 mm (0.32 in) span, 26.00 X 6.40 X 4.00 mm body
<p>20-pin DIP package with 2.54 mm (0.10 in) pitch, 8.20 mm (0.32 in) span with body size 26.00 X 6.40 X 4.00 mm</p>>NAME>VALUE<b>Frames for Sheet and Layout</b>>DRAWING_NAME>LAST_DATE_TIME>SHEETSheet:<b>FRAME</b><p>
DIN A3, landscape with location and doc. field<h3>SparkFun Connectors</h3>
This library contains electrically-functional connectors.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>Plated Through Hole - 4 Pin</h3>
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>Molex 4-Pin Plated Through-Hole</h3>
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>Screw Terminal 3.5mm Pitch -4 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 4</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 4 Pin</h3>
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch: 1.27mm</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 4 Pin Locking Footprint</h3>
Pins are offset 0.005" from center to lock pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 4 Pin Long Pads w/ Locking Footprint</h3>
Holes are offset 0.005" from center to lock pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>Molex 4-Pin Plated Through-Hole Locking</h3>
Holes are offset 0.005" from center to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>SMD - 4 Pin Right Angle Male Header</h3>
tDocu layer shows pin locations.
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 4 Pin Long Pads</h3>
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 4 Pin No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>JST Right Angle 4 Pin Plated Through Hole</h3>
<p>Specifications:
<ul><li>Pin count: 4</li>
<li>Pin pitch: 2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>+-SS>NAME>VALUE<h3>Screw Terminal 3.5mm Pitch -4 Pin PTH Locking</h3>
Holes are offset 0.005" from center to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count: 4</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>SMD- 4 Pin Right Angle </h3>
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>SMD - 4 Pin Vertical Connector</h3>
<p>Specifications:
<ul><li>Pin count:4</li>
<li>SMD Pad count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>SMD - 4 Pin w/ Long Solder Pads</h3>
No silk, but tDocu layer shows pin position.
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p><h3>JST Vertical 4 Pin Plated Through Hole</h3>
<p>Specifications:
<ul><li>Pin count: 4</li>
<li>Pin pitch: 2mm</li>
</ul></p>
<p><a href="http://www.jst-mfg.com/product/pdf/eng/ePH.pdf">Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>+-YB>NAME>VALUE<h3>SMD - 4 Pin Right-Angle Female Header</h3>
Silk outline shows header location.
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>4 Pin Connection</h3>>VALUE>NAME<h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
</ul>
<p></p>
<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b>
<ul>
<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li>
</ul>
<p></p>
<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b>
<ul>
<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li>
<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li>
<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li>
<p></p>
</ul>
<p></p>
<b>Special notes:</b>
<p> </p> Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208<h3>SparkFun LEDs</h3>
This library contains discrete LEDs for illumination or indication, but no displays.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<B>LED 5mm PTH</B><p>
5 mm, round
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 0.1inch</li>
<li>Diameter: 5mm</li>
</ul></p>
<p>Example device(s):
<ul><li>LED-IR-THRU</li>>NAME>VALUE<h3>LED 3MM PTH</h3>
3 mm, round.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 0.1inch</li>
<li>Diameter: 3mm</li>
</ul></p>
<p>Example device(s):
<ul><li>LED</li></ul>>NAME>VALUE<h3>LED 1206 SMT</h3>
1206, surface mount.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: </li>
<li>Area: 0.125" x 0.06"</li>
</ul></p>
<p>Example device(s):
<ul><li>LED</li></ul>>NAME>VALUE<B>LED 0603 SMT</B><p>
0603, surface mount.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch:0.075inch </li>
<li>Area: 0.06" x 0.03"</li>
</ul></p>
<p>Example device(s):
<ul><li>LED - BLUE</li>>NAME>VALUE<B>LED 10mm PTH</B><p>
10 mm, round
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 0.2inch</li>
<li>Diameter: 10mm</li>
</ul></p>
<p>Example device(s):
<ul><li>LED</li>LS>NAME>VALUE<B>LED 1206 SMT</B><p>
1206, surface mount
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Area: 0.125"x 0.06" </li>
</ul></p>
<p>Example device(s):
<ul><li>LED</li>>NAME>VALUE<h3>LED 3MM PTH- No Silk</h3>
3 mm, round, no silk outline of package
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 0.1inch</li>
<li>Diameter: 3mm</li>
</ul></p>
<p>Example device(s):
<ul><li>LED</li></ul>>NAME>VALUE<h3>LED 5mm KIT PTH</h3>
<p>
<b>Warning:</b> This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</p>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 0.1inch</li>
<li>Diameter: 5mm</li>
</ul></p>
<p>Example Device:
<ul><li>LED</li>
</ul></p>>NAME>VALUE<h3>LED 1206 SMT</h3>
1206, surface mount.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Area: 0.125" x 0.06"</li>
</ul></p>
<p>Example device(s):
<ul><li>LED</li></ul>>NAME>VALUE<h3>LED 5mm KIT PTH</h3>
<p>
<b>Warning:</b> This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</p>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 0.1inch</li>
<li>Diameter: 5mm</li>
</ul></p>
<p>Example Device:
<ul><li>LED</li>
</ul></p>>NAME>VALUE<h3>LED</h3>
<p></p>>NAME>VALUE<b>LED (Generic)</b>
<p>Standard schematic elements and footprints for 5mm, 3mm, 1206, and 0603 sized LEDs. Generic LEDs with no color specified.</p><b>Supply Symbols</b><p>
GND, VCC, 0V, +5V, -5V, etc.<p>
Please keep in mind, that these devices are necessary for the
automatic wiring of the supply signals.<p>
The pin name defined in the symbol is identical to the net which is to be wired automatically.<p>
In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p>
<author>Created by librarian@cadsoft.de</author>>VALUE>VALUE<b>SUPPLY SYMBOL</b><b>SUPPLY SYMBOL</b>
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.
Since Version 8.3, EAGLE supports the association of 3D packages
with devices in libraries, schematics, and board files. Those 3D
packages will not be understood (or retained) with this version.