/******************************************************************************
SparkFunBME280.h
BME280 Arduino and Teensy Driver
Marshall Taylor @ SparkFun Electronics
May 20, 2015
https://github.com/sparkfun/BME280_Breakout

Resources:
Uses Wire.h for i2c operation
Uses SPI.h for SPI operation

Development environment specifics:
Arduino IDE 1.6.4
Teensy loader 1.23

This code is released under the [MIT License](http://opensource.org/licenses/MIT).
Please review the LICENSE.md file included with this example. If you have any questions 
or concerns with licensing, please contact techsupport@sparkfun.com.
Distributed as-is; no warranty is given.
******************************************************************************/

// Test derived class for base class SparkFunIMU
#ifndef __BME280_H__
#define __BME280_H__

#include "stdint.h"

//Register names:
#define BME280_DIG_T1_LSB_REG			0x88
#define BME280_DIG_T1_MSB_REG			0x89
#define BME280_DIG_T2_LSB_REG			0x8A
#define BME280_DIG_T2_MSB_REG			0x8B
#define BME280_DIG_T3_LSB_REG			0x8C
#define BME280_DIG_T3_MSB_REG			0x8D
#define BME280_DIG_P1_LSB_REG			0x8E
#define BME280_DIG_P1_MSB_REG			0x8F
#define BME280_DIG_P2_LSB_REG			0x90
#define BME280_DIG_P2_MSB_REG			0x91
#define BME280_DIG_P3_LSB_REG			0x92
#define BME280_DIG_P3_MSB_REG			0x93
#define BME280_DIG_P4_LSB_REG			0x94
#define BME280_DIG_P4_MSB_REG			0x95
#define BME280_DIG_P5_LSB_REG			0x96
#define BME280_DIG_P5_MSB_REG			0x97
#define BME280_DIG_P6_LSB_REG			0x98
#define BME280_DIG_P6_MSB_REG			0x99
#define BME280_DIG_P7_LSB_REG			0x9A
#define BME280_DIG_P7_MSB_REG			0x9B
#define BME280_DIG_P8_LSB_REG			0x9C
#define BME280_DIG_P8_MSB_REG			0x9D
#define BME280_DIG_P9_LSB_REG			0x9E
#define BME280_DIG_P9_MSB_REG			0x9F
#define BME280_DIG_H1_REG				  0xA1
#define BME280_CHIP_ID_REG				0xD0 // Chip ID
#define BME280_RST_REG					  0xE0 // Softreset Reg
#define BME280_DIG_H2_LSB_REG			0xE1
#define BME280_DIG_H2_MSB_REG			0xE2
#define BME280_DIG_H3_REG				  0xE3
#define BME280_DIG_H4_MSB_REG			0xE4
#define BME280_DIG_H4_LSB_REG			0xE5
#define BME280_DIG_H5_MSB_REG			0xE6
#define BME280_DIG_H6_REG				  0xE7
#define BME280_CTRL_HUMIDITY_REG	0xF2 // Ctrl Humidity Reg
#define BME280_STAT_REG					  0xF3 // Status Reg
#define BME280_CTRL_MEAS_REG			0xF4 // Ctrl Measure Reg
#define BME280_CONFIG_REG				  0xF5 // Configuration Reg
#define BME280_PRESSURE_MSB_REG			0xF7 // Pressure MSB
#define BME280_PRESSURE_LSB_REG			0xF8 // Pressure LSB
#define BME280_PRESSURE_XLSB_REG		0xF9 // Pressure XLSB
#define BME280_TEMPERATURE_MSB_REG	0xFA // Temperature MSB
#define BME280_TEMPERATURE_LSB_REG	0xFB // Temperature LSB
#define BME280_TEMPERATURE_XLSB_REG	0xFC // Temperature XLSB
#define BME280_HUMIDITY_MSB_REG			0xFD // Humidity MSB
#define BME280_HUMIDITY_LSB_REG			0xFE // Humidity LSB

#define BMEADRS         0x76      // I2C address of the BME280
#define BME280_CHIP_ID  0x60      // chip ID for BME280

#endif  // End of __BME280_H__ definition check