# uncomment if you get no picture on HDMI for a default "safe" mode #hdmi_safe=1 disable_overscan=1 # uncomment to force a specific HDMI mode (this will force VGA) #hdmi_group=1 #hdmi_mode=1 # Sound output. Set to 0 or comment for autodetect, 1 for DVI, 2 to force HDMI. #hdmi_drive=2 # Using /etc/modules is deprecated and no longer supported on 4.4 kernel # So manually enable audio dtparam=audio=on # config_hdmi_boost=0 # force hdmi while the tv can take time before sending the signal on the hdmi output # hdmi_force_hotplug=1 # uncomment for composite PAL #sdtv_mode=2 # uncomment for lirc-rpi #dtoverlay=lirc-rpi # if you plug your tv at the same time as your rpi and that the rpi switches from the hdmi or give a low resolution because tv had no enough time to initialize it # boot_delay=3 # uncomment if you don't want the rainbow at startup disable_splash=1 # default CEC name cec_osd_name=recalbox # Overclock gpu_mem_256=128 gpu_mem_512=256 gpu_mem_1024=512 avoid_safe_mode=1 kernel=zImage ##################################### # display settings dtparam=spi=on dtparam=i2c_arm=off dtoverlay=mzts-28 display_rotate=1 dtoverlay=mzdpi overscan_left=0 overscan_right=0 overscan_top=0 overscan_bottom=0 framebuffer_width=640 framebuffer_height=480 enable_dpi_lcd=1 display_default_lcd=1 dpi_group=2 dpi_mode=87 dpi_output_format=0x07f003 hdmi_timings=481 0 228 88 228 640 0 2 2 4 0 0 0 60 0 32000000 3 arm_freq=1100 core_freq=550 sdram_freq=600 force_turbo=1 over_voltage=8 over_voltage_sdram_p=6 over_voltage_sdram_i=6 over_voltage_sdram_c=6 gpu_freq=250 sdram_schmoo=0x02000020 # audio settings dtoverlay=pwm-2chan,pin=18,func=2,pin2=19,func2=2