#include #include //network NB: Pins 10, 11, 12 and 13 are reserved for Ethernet module. byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }; byte ip[] = { 192, 168, 1, 200 }; byte gateway[] = { 192, 168, 1, 1 }; byte subnet[] = { 255, 255, 255, 0 }; String inString = String(35); String Led; String z; int led[] = {00, 1, 2, 3, 4, 5, 6, 7, }; //Led pins num 0 in arry is not used int numofleds = 5; //numofleds String value[] = {"on","on","on","on","on","on","on","on","on"}; //startup all led are off EthernetServer server(80); String data; void setup() { Serial.begin(9600); Ethernet.begin(mac, ip,gateway,subnet); server.begin(); //set pin mode for (int j = 0; j < (numofleds + 1); j++){ pinMode(led[j], OUTPUT); } Serial.println("Serial READY"); Serial.println("Ethernet READY"); Serial.println("Server READY"); } void loop() { EthernetClient client = server.available(); if(client){ // an http request ends with a blank line boolean current_line_is_blank = true; while (client.connected()) { if(client.available()) { char c = client.read(); // if we've gotten to the end of the line (received a newline // character) and the line is blank, the http request has ended, // so we can send a reply if (inString.length() < 35) { inString.concat(c); } if (c == '\n' && current_line_is_blank) { // send a standard http response header client.println("HTTP/1.1 200 OK"); client.println("Content-Type: text/html"); client.println(); client.println(""); break; } if (c == '\n') { // we're starting a new line current_line_is_blank = true; } else if (c != '\r') { // we've gotten a character on the current line current_line_is_blank = false; } } } // give the web browser time to receive the data delay(10); inString = ""; client.stop(); } }